[Commercial meshers] problems with .msh mesh

paulovss · August 31, 2011, 14:45

Hello,
I'm having trouble converting a mesh. msh . In the terminal window of my case, when I type the command gmshToFoam, it appears:
-> FOAM FATAL IO ERROR:
wrong token type - expected word found on line 0 the punctuation token '('

file: IStringStream.sourceFile at line 0.

From function operator>> (istream &, & word)
in file primitives / strings / word / wordIO.C at line 76.

FOAM exiting

what it means and how can I solve this problem? I am new to OpenFoam. Thank you.

-mAx- · September 1, 2011, 03:15

Are you sure that your mesh file comes from Gmesh?
Because Gambit can also generate *.msh files, and in this case you need

paulovss · September 29, 2011, 09:05

I made this mesh on Gambit. Do I need do something diferent to export it to OpenFoam ?

Thanks.

-mAx- · September 29, 2011, 09:08

fluentMeshToFoam instead of gmshToFoam
http://www.cfd-online.com/Forums/ope...open-foam.html

paulovss · September 29, 2011, 22:42

it works! Thanks! ;D

August 31, 2011, 14:45	problems with .msh mesh	#1
paulovss New Member Paulo Victor Soares e Silva Join Date: Aug 2011 Posts: 7 Rep Power: 15	Hello, I'm having trouble converting a mesh. msh . In the terminal window of my case, when I type the command gmshToFoam, it appears: -> FOAM FATAL IO ERROR: wrong token type - expected word found on line 0 the punctuation token '(' file: IStringStream.sourceFile at line 0. From function operator>> (istream &, & word) in file primitives / strings / word / wordIO.C at line 76. FOAM exiting what it means and how can I solve this problem? I am new to OpenFoam. Thank you.

September 1, 2011, 03:15		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Are you sure that your mesh file comes from Gmesh? Because Gambit can also generate *.msh files, and in this case you need __________________ In memory of my friend Hervé: CFD engineer & freerider

September 29, 2011, 09:08		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	fluentMeshToFoam instead of gmshToFoam http://www.cfd-online.com/Forums/ope...open-foam.html __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
[ANSYS Meshing] First layter thickness on mesh causing problems	Rik102	ANSYS Meshing & Geometry	0	November 4, 2016 10:51
[snappyHexMesh] SnappyHexMesh for internal Flow	vishwa	OpenFOAM Meshing & Mesh Conversion	24	June 27, 2016 09:54
[Commercial meshers] Problems with ANSYS mesh conversion	tdog	OpenFOAM Meshing & Mesh Conversion	1	March 31, 2016 18:36
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 10:38

September 29, 2011, 09:05		#3
paulovss New Member Paulo Victor Soares e Silva Join Date: Aug 2011 Posts: 7 Rep Power: 15	I made this mesh on Gambit. Do I need do something diferent to export it to OpenFoam ? Thanks.

September 29, 2011, 22:42		#5
paulovss New Member Paulo Victor Soares e Silva Join Date: Aug 2011 Posts: 7 Rep Power: 15	it works! Thanks! ;D