[lfgmarc]

I am trying to reproduce the results of pitzdaily (XiFoam) case, with the mesh from gmsh , but when I doing the mesh convertion and run the case , this error occurs:

*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.7.x |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.7.x-4bbf33160caf
Exec : XiFoam
Date : May 25 2011
Time : 00:15:00
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Reading combustion properties


Ignition on

Reading g
Reading thermophysical properties

Selecting thermodynamics package hhuMixtureThermo<homogeneousMixture<sutherlandTran sport<specieThermo<janafThermo<perfectGas>>>>>
min(b) = 1

Reading field U

Reading/calculating face flux field phi

Creating turbulence model

Selecting turbulence model type LESModel
Selecting LES turbulence model oneEqEddy


--> FOAM FATAL ERROR:
Case is not 3D or 2D, LES is not applicable

From function cubeRootVolDeAny idea what could by the problem?, thanks a lot for your help lta::calcDelta()
in file cubeRootVolDelta/cubeRootVolDelta.C at line 72.

FOAM exiting

Any idea about what could be the problem?, thanks a lot for your help


Fg