[Commercial meshers] gambit import mesh quality problem with checkmesh -- CFD Online Discussion Forums

December 26, 2010, 14:17	gambit import mesh quality problem with checkmesh	#1
mrshb4 Member Mohammad.R.Shetab Join Date: Jul 2010 Posts: 49 Rep Power: 16	Dear Foamers, I have such a 3D complicated geometry in gambit software with tetrahedral mesh. I check mesh quality in gabit and maximun skewness there would be 0.95. When I import it to Openfoam with fluentMeshToFoam, and check the quality with checkMesh Max skewness would be about 1.5 and my case will diverge becasue of this poor quality.(My cases with good qualities (max skewness around 0.6) converged.) How can I correct it?! Can I import just the geometry from gambit and then mesh it in OpenFoam itself?!!! Thankyou Mohammadreza

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 07:41
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11
problem when I import mesh with cyclic graduated BC	Cyp	OpenFOAM	0	March 3, 2011 11:38
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55

All times are GMT -4. The time now is 02:00.