[Commercial meshers] dividing a volume into many parts

kasool · November 26, 2010, 07:26

Good morning
I'm studying mass and heat transfer into a solar chimney and I would like to divide the geometric model to many parts. this will facilitate the meshing of every part in Gambit. Please can someone help me?

kasool · November 27, 2010, 12:49

I have to mesh a solar chimney in gambit (figure 1) (3D) and I would like to divide the geometry model in 3 parts (the chimney, the collector and the transition section) using the unreal plan method and then mesh every part separetly like in figure 2.
Please can someone help me?

kasool · November 27, 2010, 13:02

I have to mesh a solar chimney in gambit (figure 1) (3D) and I would like to divide the geometry model in 3 parts (the chimney, the collector and the transition section) using the unreal plan method and then mesh every part separetly like in figure 2.
Please can someone help me?

November 26, 2010, 07:26	dividing a volume into many parts	#1
kasool New Member amel Join Date: Oct 2010 Posts: 13 Rep Power: 16	Good morning I'm studying mass and heat transfer into a solar chimney and I would like to divide the geometric model to many parts. this will facilitate the meshing of every part in Gambit. Please can someone help me?

November 27, 2010, 12:49	meshing a solar chimney 3D	#2
kasool New Member amel Join Date: Oct 2010 Posts: 13 Rep Power: 16	I have to mesh a solar chimney in gambit (figure 1) (3D) and I would like to divide the geometry model in 3 parts (the chimney, the collector and the transition section) using the unreal plan method and then mesh every part separetly like in figure 2. Please can someone help me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] blockMesh error - Negative Volume Block	adoledin	OpenFOAM Meshing & Mesh Conversion	2	June 22, 2016 11:44
multiphaseEulerFoam (OF2.3.0) : Courant number explodes when running in parallel	Mehrez	OpenFOAM Running, Solving & CFD	10	May 18, 2016 12:44
Wrong flow in ratating domain problem	Sanyo	CFX	17	August 15, 2015 07:20
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 10:56
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 15:11

November 27, 2010, 13:02		#3
kasool New Member amel Join Date: Oct 2010 Posts: 13 Rep Power: 16	I have to mesh a solar chimney in gambit (figure 1) (3D) and I would like to divide the geometry model in 3 parts (the chimney, the collector and the transition section) using the unreal plan method and then mesh every part separetly like in figure 2. Please can someone help me?