[Technical] Using stitchmesh on imported gmsh meshes -- CFD Online Discussion Forums

November 26, 2005, 05:22	Using stitchmesh on imported gmsh meshes	#1
christian67 New Member Christian Hubbauer Join Date: Mar 2009 Location: Neuburg/Do., Germany Posts: 4 Rep Power: 17	Dear all, can anybody help me on how the stitchmesh utility works ? I've tried to create a hex gmsh mesh in order to understand. The mesh has been imported with gmshToFoam and the patches created look quite reasonable in paraFoam. Executing "stitchmesh . stitchtest patch4 patch3 -partial" leads to an error message "--> FOAM FATAL ERROR : Face 3683 reduced to less than 3 points. Topological/cutting error B. Old face: 1(10) new face: 1(10) I'll try to attach the case here. Any help is appreciated. Christian stitchtest.tar.gz

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[mesh manipulation] stitchMesh: multiple meshes	GerhardHolzinger	OpenFOAM Meshing & Mesh Conversion	3	August 25, 2017 13:43
[OpenFOAM] Visualizing imported meshes	sudo	ParaView	1	November 9, 2013 16:23
[mesh manipulation] Problem with stitchMesh: it does not work in meshes with several common patches	arnau1985	OpenFOAM Meshing & Mesh Conversion	2	June 25, 2013 09:49
using METIS functions in fortran	dokeun	Main CFD Forum	7	January 29, 2013 05:06
[Gmsh] Import problem	ARC	OpenFOAM Meshing & Mesh Conversion	0	February 27, 2010 11:56

All times are GMT -4. The time now is 18:53.