[Commercial meshers] Converting Gambit Neutral Meshes

plmauk · July 20, 2007, 06:29

Hi, everyone.

I had to convert a gambit-mesh to FoamX.
It worked. Now, I have to set boundary conditions.
The Question is : what does it mean "startFace"
and "nFaces" ?

Thanks,
Paul

July 20, 2007, 07:58

Hi Paul,
"starFace" is the first face of your boundary condition and "nFaces" is the number of faces
of the same boundary contidion. You can read them in the file "faces".

Gabriele

ilpaso · July 20, 2007, 08:08

Hi Paul

I use this procedure in gambit:
- create mesh
- change solver to "generic"
- create patches with differents name (wall, inlet, ...) and the same type: "ELEMENT_SIDE"
- use gambitToMesh to convert mesh
- In FoamX define the patch types

bye
Davide

July 20, 2007, 06:29	Converting Gambit Neutral Meshes	#1
plmauk Member Paul Mauk Join Date: Mar 2009 Posts: 39 Rep Power: 17	Hi, everyone. I had to convert a gambit-mesh to FoamX. It worked. Now, I have to set boundary conditions. The Question is : what does it mean "startFace" and "nFaces" ? Thanks, Paul

July 20, 2007, 07:58	Hi Paul, "starFace" is the fi	#2
gabrieler Guest Posts: n/a	Hi Paul, "starFace" is the first face of your boundary condition and "nFaces" is the number of faces of the same boundary contidion. You can read them in the file "faces". Gabriele

July 20, 2007, 08:08	Hi Paul I use this procedur	#3
ilpaso Member Davide Pasini Join Date: Mar 2009 Posts: 34 Rep Power: 17	Hi Paul I use this procedure in gambit: - create mesh - change solver to "generic" - create patches with differents name (wall, inlet, ...) and the same type: "ELEMENT_SIDE" - use gambitToMesh to convert mesh - In FoamX define the patch types bye Davide

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
URGENT: need Pointwise Converter to Gambit Neutral File	Selissias	Main CFD Forum	0	July 20, 2017 09:35
[Salome] IdeasUnvToFoam is very slow when converting meshes	armitatz	OpenFOAM Meshing & Mesh Conversion	1	May 2, 2017 13:48
Aircraft Sim - TGrid and Gambit Meshes differences	Dave S	FLUENT	6	March 24, 2008 08:10
how combine two volume MESHES in GAMBIT	sreenivas	FLUENT	2	October 10, 2007 11:48
set boundary condition in Neutral file, in Gambit	Vito Chow	FLUENT	2	April 26, 2005 07:50