 |
 |
 |
|
|
|
[Sponsors] | ||||
[mesh manipulation] Moving Mesh Addremove layer |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 12, 2009, 12:05
|
Moving Mesh Addremove layer
|
#1 |
|
New Member
gb
Join Date: Mar 2009
Posts: 3
Rep Power: 17  |
Hi all,
I just started to use OpenFoam a few weeks ago. I performed a few tutorials and now try my own based on engineFoam. I generated a 3D combustion chamber mesh with gambit and exported it to foam with Piston, CylinderHead and liner patches. I rerun the engineFoam tutorial and the mesh is moving well but I would like to be able to automaticaly add/remove layers in order to avoid as much as possible the mesh deformation which leads to CFL crashes... Any Idea ? Thanks for your help greg |
|
|
|
|
|
February 12, 2009, 12:12
|
Sorry for the double post...Co
|
#2 |
|
New Member
gb
Join Date: Mar 2009
Posts: 3
Rep Power: 17 |
Sorry for the double post...Computer mistake.
greg |
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| y+ = 1 boundary layer mesh with snappyHexMesh | Arzed23 | OpenFOAM Running, Solving & CFD | 6 | November 23, 2022 16:15 |
| [snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 08:34 |
| [snappyHexMesh] Problem airfoil snappyhexmesh add layer | bye bye my blue | OpenFOAM Meshing & Mesh Conversion | 1 | May 5, 2017 06:56 |
| [ICEM] 3D Dynamic Mesh - Boundary layer mesh issues | nathanricks | ANSYS Meshing & Geometry | 0 | September 23, 2015 06:14 |
| [snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 10:03 |
Linear Mode
