 |
 |
 |
|
|
|
[Sponsors] | ||||
[snappyHexMesh] Regarding mesh quality effect on the simulation |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 18, 2024, 05:18
|
Regarding mesh quality effect on the simulation
|
#1 |
|
New Member
sridhar
Join Date: Oct 2024
Posts: 21
Rep Power: 2  |
I'm trying to run a generic case of flow simulation on openFoam using the compressibleInterFoam solver and running into floating point exception in temperature field even thought I have gf l given internal field to be 300 and inlet and outlet 300 and the walls to be zeroGradient. Does the mesh skewness or quality contribute to this? If so what are the key options in this case.
|
|
|
|
|
|
| Tags |
| compressibleinterfoam, meshing, openfoam, solver |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] non uniform mesh near the stl object | vava10 | OpenFOAM Meshing & Mesh Conversion | 0 | January 31, 2021 15:41 |
| [ICEM] Bad Quality | **Anny** | ANSYS Meshing & Geometry | 7 | May 28, 2015 06:03 |
| [snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 22:11 |
| Improve Mesh quality - airfoil simulation | Lukas84 | STAR-CCM+ | 4 | July 6, 2010 11:07 |
| Different types of Mesh quality | hagupta | CFX | 1 | June 30, 2006 08:42 |
Linear Mode
