[Other] TopoSet usage to distinguish the tapered/wedge part

AMitgM95 · March 29, 2023, 06:52

Hello, foamers,

I want to perform a CHT simulation, flow over a compression wedge, for which I would like to know how to differentiate or separate the wedge (ramp) part using topoSet. I tried the rotatedBoxToCell set. However, it couldn't work. The geometry (image) is provided in the link below.

https://drive.google.com/file/d/1vZg...ew?usp=sharing

The help would be highly appreciated.

Thank you

AMitgM95 · March 30, 2023, 06:06

Hello foamers,

The issue has been resolved.

Thanks

March 29, 2023, 06:52	TopoSet usage to distinguish the tapered/wedge part	#1
AMitgM95 New Member Amit Makhija Join Date: Apr 2018 Posts: 11 Rep Power: 8	Hello, foamers, I want to perform a CHT simulation, flow over a compression wedge, for which I would like to know how to differentiate or separate the wedge (ramp) part using topoSet. I tried the rotatedBoxToCell set. However, it couldn't work. The geometry (image) is provided in the link below. https://drive.google.com/file/d/1vZg...ew?usp=sharing The help would be highly appreciated. Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Selecting the faces of part body after Enclosure and boolean operations	Amar21	FLUENT	6	November 19, 2015 10:23
Structural analysis- bosy surface part from the solid part	andreina	Structural Mechanics	0	October 12, 2015 09:56
[snappyHexMesh] crash sHM	H25E	OpenFOAM Meshing & Mesh Conversion	11	November 10, 2014 11:27
replacing of shock tube high pressure part with a boundary condition for low pressure	immortality	Main CFD Forum	0	May 2, 2013 13:30
what boundary condition is proper for simulation of shock-tube low pressure part?	immortality	OpenFOAM Running, Solving & CFD	0	May 2, 2013 13:22

March 30, 2023, 06:06		#2
AMitgM95 New Member Amit Makhija Join Date: Apr 2018 Posts: 11 Rep Power: 8	Hello foamers, The issue has been resolved. Thanks