[snappyHexMesh] Splitting STL file for meshing through snappyHexMesh

a3r15 · July 29, 2021, 15:20

what is the best way to split my stl file generated through solidworks for all the desired features (inlets, outlets, etc) If anyone has any useful tutorials to help me on my way that would be greatly appreciated, or a simpler method of meshing - I have tried blender and it is a daunting process as the program has many features. I have attached an imagine of my domain so you can see what I am working with.
(i also found that the mesh shown in blender on the surface only shows one layer of cells on the main body, i imagine that will be a problem so if anyone has any incite, it would be welcome)
Thanks in advance
Extra info, i originally planned to mesh through ansys software but limited by cell count

a3r15 · July 31, 2021, 14:52

I was able to figure out how to use blender using a video by Jozsef Nagy - https://www.youtube.com/watch?v=b0h8MxEMQPM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using PengRobinsonGas EoS with sprayFoam	Jabo	OpenFOAM Running, Solving & CFD	36	July 16, 2024 04:52
[foam-extend.org] problem when installing foam-extend-1.6	Thomas pan	OpenFOAM Installation	7	September 9, 2015 22:53
[swak4Foam] Problem installing swak_2.x for OpenFoam-2.4.0	towanda	OpenFOAM Community Contributions	6	September 5, 2015 22:03
SparceImage v1.7.x Issue on MAC OS X	rcarmi	OpenFOAM Installation	4	August 14, 2014 07:42
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12	keepfit	ParaView	60	September 18, 2013 04:23

July 31, 2021, 14:52		#2
a3r15 New Member Ali Abdulali Join Date: Dec 2019 Posts: 2 Rep Power: 0	I was able to figure out how to use blender using a video by Jozsef Nagy - https://www.youtube.com/watch?v=b0h8MxEMQPM