[shimakasaei]

Hi
I am simulating flow in a flume with the use of olaFlow.
I used snappyHexMesh for the solid structures that I have in the flow, it runs without any error but at the end, when I open it with paraview, it doens't show me any whole in the place of my ".stl" files.

Here is my snappyHexMeshDict, I modified it according to the breakwater tutorial of olaFlow but the results are not the same. (although in breakwater example it shows a whole, in my simulation it doesn't)

FoamFile
{
version 2.0;
format ascii;
class dictionary;
object snappyHexMeshDict;
}

castellatedMesh true;
snap false;
addLayers false;

geometry
{
A3b2.stl
{
type triSurfaceMesh;
name A3b2;
}
A3b1.stl
{
type triSurfaceMesh;
name A3b1;
}
A3b3.stl
{
type triSurfaceMesh;
name A3b3;
}

}

castellatedMeshControls
{
maxLocalCells 10000000;
maxGlobalCells 10000000;
minRefinementCells 10;
maxLoadUnbalance 0.10;
nCellsBetweenLevels 2;
//resolveFeatureAngle 30;

features
(
{
file "A3b2.eMesh";
level 1;
}
{
file "A3b1.eMesh";
level 1;
}
{
file "A3b3.eMesh";
level 1;
}
);

refinementSurfaces
{
A3b2
{
level (0 0);
}
A3b1
{
level (0 0);
}
A3b3
{
level (0 0);
}
}

resolveFeatureAngle 30;

refinementRegions
{

}

locationInMesh (6.6 0 0.0);
allowFreeStandingZoneFaces true;
}

snapControls
{
nSmoothPatch 3;
tolerance 4.0;
nSolveIter 30;
nRelaxIter 5;
nFeatureSnapIter 5;
}

addLayersControls
{
relativeSizes true;

layers
{
terrain_patch0
{
nSurfaceLayers 9;
}

ground
{
nSurfaceLayers 9;
}
}

expansionRatio 1.2;
finalLayerThickness 0.3;
minThickness 0.0000001;
nGrow 0;
featureAngle 180;
nRelaxIter 5;
nSmoothSurfaceNormals 1;
nSmoothNormals 3;
nSmoothThickness 10;
maxFaceThicknessRatio 0.5;
maxThicknessToMedialRatio 0.3;
minMedianAxisAngle 90;
nBufferCellsNoExtrude 0;
nLayerIter 50;
nRelaxedIter 20;
}

meshQualityControls
{
maxNonOrtho 80;
maxBoundarySkewness 20;
maxInternalSkewness 4;
maxConcave 80;
minVol 1e-13;
minTetQuality -1E30;
minArea -1;
minTwist 0.05;
minDeterminant 0.001;
minFaceWeight 0.05;
minVolRatio 0.01;
minTriangleTwist -1;
nSmoothScale 4;
errorReduction 0.75;
relaxed
{
maxNonOrtho 80;
}
}

debug 0;
mergeTolerance 1e-6;


I will appreciate for any help.
Thanks,
shima