[Other] Dynamic Mesh problem

Kimmy · March 12, 2018, 07:39

Hello everyone, I have a question.

I'm doing a fluid simulation that describes the opening moment of the pneumatic valve.Because the geometry near the valve changes greatly and has directionality, I think movingConeTopoFvMesh is very suitable.
In fact, my process is to use FreeCAD to create the model, then use SnappyHexMesh to create the static mesh, and finally dynamic mesh.
I don't know if my idea is correct.
If anyone has a movingConeTopoFvMesh related study, please send it to me. I did not find it in Tutorials

Thank you all.

clapointe · March 16, 2018, 14:28

There are various tutorials for moving cones -- here is one using pimpleDyMFoam. It should be a good place to start. https://github.com/OpenFOAM/OpenFOAM...oam/movingCone

Caelan

March 12, 2018, 07:39	Dynamic Mesh problem	#1
Kimmy New Member BowenXue Join Date: Mar 2018 Posts: 1 Rep Power: 0	Hello everyone, I have a question. I'm doing a fluid simulation that describes the opening moment of the pneumatic valve.Because the geometry near the valve changes greatly and has directionality, I think movingConeTopoFvMesh is very suitable. In fact, my process is to use FreeCAD to create the model, then use SnappyHexMesh to create the static mesh, and finally dynamic mesh. I don't know if my idea is correct. If anyone has a movingConeTopoFvMesh related study, please send it to me. I did not find it in Tutorials Thank you all.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 19:57
Dynamic mesh update problem.	David	FLUENT	3	March 15, 2012 06:02
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11
CFD-3D flow problem using Dynamic mesh method.	Sar_mech	FLUENT	1	November 27, 2008 22:17

March 16, 2018, 14:28		#2
clapointe Senior Member Join Date: Aug 2015 Posts: 494 Rep Power: 15	There are various tutorials for moving cones -- here is one using pimpleDyMFoam. It should be a good place to start. https://github.com/OpenFOAM/OpenFOAM...oam/movingCone Caelan