[Commercial meshers] is it possible do use foamMeshtoFluent for 2D?

Jeanp · April 28, 2015, 11:56

Hi all,

I would like to know if it is possible to convert a "2D" mesh made with snappyHexMesh (extrudeMesh) into a 2D mesh for Fluent. I've tried with foamMeshToFluent but I get a 3D .msh. For me it is logic but I just want to know if it is possible and how also

Thanks!

Jean

wyldckat · April 30, 2015, 13:53

Quick answer:

OpenFOAM mostly works with 3D meshes, therefore it's not likely that it will be able to export to Fluent's 2D msh format.
If Fluent can load another type of surface mesh, you can try using foamToSurface, for example if you run it like this:
Code:
```
foamToSurface test.msh
```
It will tell you this:
Code:
```
Unknown file extension for writing : msh
Valid types: ( ac gts inp obj off ofs smesh stl stlb tri vtk wrl x3d )
```
Since the utility fluentMeshToFoam can import 2D meshes, you could ask/hire someone to create a modified version of foamMeshToFluent to support this feature.

April 28, 2015, 11:56	is it possible do use foamMeshtoFluent for 2D?	#1
Jeanp New Member Jean-Pierre Join Date: May 2014 Posts: 9 Rep Power: 12	Hi all, I would like to know if it is possible to convert a "2D" mesh made with snappyHexMesh (extrudeMesh) into a 2D mesh for Fluent. I've tried with foamMeshToFluent but I get a 3D .msh. For me it is logic but I just want to know if it is possible and how also Thanks! Jean

April 30, 2015, 13:53		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,982 Blog Entries: 45 Rep Power: 128	Quick answer: OpenFOAM mostly works with 3D meshes, therefore it's not likely that it will be able to export to Fluent's 2D msh format. If Fluent can load another type of surface mesh, you can try using foamToSurface, for example if you run it like this: Code: foamToSurface test.msh It will tell you this: Code: Unknown file extension for writing : msh Valid types: ( ac gts inp obj off ofs smesh stl stlb tri vtk wrl x3d ) Since the utility fluentMeshToFoam can import 2D meshes, you could ask/hire someone to create a modified version of foamMeshToFluent to support this feature.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] foamMeshToFluent does not write zones	doubtsincfd	OpenFOAM Meshing & Mesh Conversion	9	October 29, 2019 10:57
[Commercial meshers] foamMeshToFluent 3D mesh error - line 1: syntax error	dacets	OpenFOAM Meshing & Mesh Conversion	0	June 29, 2018 09:37
[Commercial meshers] foamMeshToFluent error!!!!	zaynah04	OpenFOAM Meshing & Mesh Conversion	3	June 27, 2016 18:07
[Commercial meshers] foamMeshToFluent - very high skewness after conversion!	kishpishar	OpenFOAM Meshing & Mesh Conversion	1	January 18, 2015 16:38
[Commercial meshers] foamMeshToFluent with different zones	nwpukaka	OpenFOAM Meshing & Mesh Conversion	0	October 21, 2014 03:51