|
[Sponsors] |
[Commercial meshers] Creating GAMBIT mesh as multi-region for chtMultiRegion*Foam in OpenFOAM |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 2, 2015, 04:10 |
Creating GAMBIT mesh as multi-region for chtMultiRegion*Foam in OpenFOAM
|
#1 |
Member
sa har
Join Date: Aug 2014
Posts: 34
Rep Power: 12 |
hi,i have geometry in gambit (2D) that it has 3 face (2fluid 1 solid).how can i make 3 distinct regions for chtMultiRegion*.* solvers?
|
|
April 20, 2015, 08:40 |
|
#2 |
Member
Join Date: Apr 2015
Location: EU
Posts: 38
Rep Power: 11 |
In Gambit, there is an option to define a "zone" or something like that, it's in the same menu where you set boundary conditions, just the other button.
From there you could probably set multiple mesh regions (i.e. fluid1, flud2 etc). Then export .msh and fluentMeshToFoam. (or 2D in your case). After that I have no experience. I hope it helps |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water! | divergence | OpenFOAM Meshing & Mesh Conversion | 0 | January 23, 2019 05:17 |
Creating a axi-symmetric mesh for OpenFOAM | AnthonyP | GridPro | 2 | December 27, 2018 13:51 |
[Commercial meshers] Exporting to OpenFOAM mesh with "inner" wall region | raagh77 | OpenFOAM Meshing & Mesh Conversion | 0 | April 24, 2012 07:23 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |