[Commercial meshers] Error on mesh conversion from Fluent to openFoam

sam.ho · November 11, 2013, 06:50

Hi Foamers

I am a beginner in OpenFOAM . I took a 3d fluent mesh and converted to OpenFOAM by using fluent3DMeshToFoam command.
I have attached the snapshot of error .
Kindly look in to the problem and help me to resolve this .

Thangam · December 11, 2013, 04:50

try this:

http://www.cfd-online.com/Forums/ope...rted-mesh.html

rsingh7 · February 14, 2014, 19:58

Hi Sam,

I have problem in importing fluent mesh file to Openfoam. Can you send the mesh file that you have successfully exported in OpenFoam. I will look your mesh file and will change my mesh file accordingly.

Regards

sam.ho · February 17, 2014, 23:41

Hi Rajesh Singh,

The mesh file is very huge and its confidential too. Let me know what would be your error so that i can address ?

Regards,
Sam

rsingh7 · February 20, 2014, 18:18

Hi Sam,

Thanks for your response. Could you please go through the link where I have posted my problem.

http://www.cfd-online.com/Forums/ope...-openfoam.html

Regards

sam.ho · February 20, 2014, 23:47

Hi Rajesh Singh,

Could you please send the error snapshot ?
So that we can help .

rsingh7 · February 21, 2014, 01:12

HI Sam,

Eroor is:

Segmentation fault

It does not any thing extra.

Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Fluent mesh to OF conversion	theHumbleOne	OpenFOAM Meshing & Mesh Conversion	7	July 30, 2021 09:44
[Commercial meshers] SolidWorks to ANSYS to OpenFoam mesh conversion failed	nuclear_swapnil	OpenFOAM Meshing & Mesh Conversion	1	October 11, 2017 01:38
[Commercial meshers] Problem encountered in converting Fluent mesh to OpenFOAM Mesh	sathya123	OpenFOAM Meshing & Mesh Conversion	2	November 22, 2015 04:22
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 10:38
[Commercial meshers] Mesh conversion from fluent to OpenFOAM	harsha_kulkarni	OpenFOAM Meshing & Mesh Conversion	1	June 28, 2014 18:26

December 11, 2013, 04:50		#2
Thangam Member Thangam Natarajan Join Date: Dec 2010 Location: Perth Posts: 70 Rep Power: 17	try this: http://www.cfd-online.com/Forums/ope...rted-mesh.html

February 14, 2014, 19:58		#3
rsingh7 New Member Rajesh Singh Join Date: Jun 2010 Posts: 15 Rep Power: 16	Hi Sam, I have problem in importing fluent mesh file to Openfoam. Can you send the mesh file that you have successfully exported in OpenFoam. I will look your mesh file and will change my mesh file accordingly. Regards

February 17, 2014, 23:41		#4
sam.ho Senior Member Join Date: Sep 2013 Location: Bangalore India Posts: 134 Rep Power: 13	Hi Rajesh Singh, The mesh file is very huge and its confidential too. Let me know what would be your error so that i can address ? Regards, Sam

February 20, 2014, 18:18		#5
rsingh7 New Member Rajesh Singh Join Date: Jun 2010 Posts: 15 Rep Power: 16	Hi Sam, Thanks for your response. Could you please go through the link where I have posted my problem. http://www.cfd-online.com/Forums/ope...-openfoam.html Regards

February 20, 2014, 23:47		#6
sam.ho Senior Member Join Date: Sep 2013 Location: Bangalore India Posts: 134 Rep Power: 13	Hi Rajesh Singh, Could you please send the error snapshot ? So that we can help .

February 21, 2014, 01:12		#7
rsingh7 New Member Rajesh Singh Join Date: Jun 2010 Posts: 15 Rep Power: 16	HI Sam, Eroor is: Segmentation fault It does not any thing extra. Regards