[Other] issue 1_running several mesh configurations for a cavity model (tutorial)

Luis Batista · March 18, 2013, 07:17

Dear OpenFoam Users,

this is my debut in this Forum along.

I have run some however, I am interessed in doing some variations in statial step size of structured mesh ans study how does that compare with a spectral methodology.

I would like to run several mesh cases and collect results for specific points in the simulation. Afterwards, I would process then for error estimation.

I request help to explain me how could this be done and it is something that a very recent user of OpenFoam could aim to. If not, I would run the blockmesh manually and collect the data in a primitive fashion.

note:
I am a complete beginner in OpenFoam.

wyldckat · March 24, 2013, 14:51

Greetings Luis and welcome to the forum!

I'll have to be quick to answer - Google this:

Quote:

openfoam probes

Good luck! Best regards,
Bruno

Luis Batista · March 24, 2013, 19:24

Thanks!

I have solved this issue manually but this function is indeed useful.

regards,
Luis

March 18, 2013, 07:17	issue 1_running several mesh configurations for a cavity model (tutorial)	#1
Luis Batista New Member Luis Batista Join Date: Mar 2013 Location: Lisboa / Setúbal Posts: 17 Rep Power: 13	Dear OpenFoam Users, this is my debut in this Forum along. I have run some however, I am interessed in doing some variations in statial step size of structured mesh ans study how does that compare with a spectral methodology. I would like to run several mesh cases and collect results for specific points in the simulation. Afterwards, I would process then for error estimation. I request help to explain me how could this be done and it is something that a very recent user of OpenFoam could aim to. If not, I would run the blockmesh manually and collect the data in a primitive fashion. note: I am a complete beginner in OpenFoam.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rotation - Overset Mesh Issue	huangdf	STAR-CCM+	0	July 25, 2018 15:09
[CAD formats] beginners how to convert binarySTL to asciiSTL with regions (good for SHM tutorial)	soonic	OpenFOAM Meshing & Mesh Conversion	11	July 28, 2017 16:46
Gambit problems	Althea	FLUENT	22	January 4, 2017 04:19
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 10:38
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 10:38

March 24, 2013, 19:24		#3
Luis Batista New Member Luis Batista Join Date: Mar 2013 Location: Lisboa / Setúbal Posts: 17 Rep Power: 13	Thanks! I have solved this issue manually but this function is indeed useful. regards, Luis