Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] Separating areas which don't have layers for visualizing

Updated Threads

Reply

Search this Thread

March 15, 2013, 09:29	Separating areas which don't have layers for visualizing	#1
aerogt3 Member Join Date: Mar 2009 Posts: 90 Rep Power: 17	Hey all, I am using snappyHexMesh, and am wondering how I can see which areas of my mesh are not getting layers? At the end of the process snappyHexMesh tells you something like this: Code: Extruding 670264 out of 690052 faces (97.1%). Removed extrusion at 1 faces. Added 1894349 out of 2070156 cells (91.5%). I would basically like to see ONLY these 91.5% of faces where layers were successfully added, or alternatively the 8.5% where layers were not grown. Is there any way to do this?

Reply

Tags

areas, faces, layers, visualization

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Help with Snappy: no layers growing	GianF	OpenFOAM Meshing & Mesh Conversion	2	September 23, 2020 09:26
[snappyHexMesh] Collapsing layers	RomCFD	OpenFOAM Meshing & Mesh Conversion	5	January 18, 2020 02:39
[ICEM] Prism layers distorted near trailing edge of blade-Unstructured Mesh	Rohith Giridhar	ANSYS Meshing & Geometry	3	June 29, 2015 18:52
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry	pizzaspinate	OpenFOAM Meshing & Mesh Conversion	1	February 25, 2015 08:05
Layers and turbolence in Interfoam	danvica	OpenFOAM Running, Solving & CFD	0	April 30, 2012 04:11

All times are GMT -4. The time now is 18:25.