[Salome] Hybrid mesh from Salome to OpenFOAM

Sören Sander · February 25, 2013, 12:19

Hello,

I tried to export a hex/tet mesh from Salome to OF. With .unv the pyramids are not exported, so I tried to export as .med and import to gmsh. Then use gmshToFoam to export to OF. But I get this error:

Does your file specify any 3D elements (hex=5, prism=6, pyramid=7, tet=4)?
Perhaps you have not exported the 3D elements?

Is there any way to export a hex/tet mesh to OF? I also tried to export a pure tet mesh (which does work with .unv export) with gmsh and the same error occurs.

Kruno · February 22, 2014, 11:50

Same problem here!
If you found a solution can you post it here? You would help me a lot..

Sören Sander · March 7, 2014, 09:16

Hi Kruno,

I could not solve the problem. Actually, my solution was to use another meshing tool...

February 25, 2013, 12:19	Hybrid mesh from Salome to OpenFOAM	#1
Sören Sander Member Sören Sander Join Date: Sep 2012 Location: Germany Posts: 43 Rep Power: 14	Hello, I tried to export a hex/tet mesh from Salome to OF. With .unv the pyramids are not exported, so I tried to export as .med and import to gmsh. Then use gmshToFoam to export to OF. But I get this error: Does your file specify any 3D elements (hex=5, prism=6, pyramid=7, tet=4)? Perhaps you have not exported the 3D elements? Is there any way to export a hex/tet mesh to OF? I also tried to export a pure tet mesh (which does work with .unv export) with gmsh and the same error occurs.

February 22, 2014, 11:50		#2
Kruno New Member Kruno Join Date: Jul 2013 Posts: 2 Rep Power: 0	Same problem here! If you found a solution can you post it here? You would help me a lot.. Last edited by Kruno; February 22, 2014 at 11:56. Reason: Forget to write for help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Salome] Problems for creating mesh in salome to OPENFOAM	bye bye my blue	OpenFOAM Meshing & Mesh Conversion	8	December 5, 2023 01:57
OpenFOAM v3.0+ ??	SBusch	OpenFOAM	22	December 26, 2016 15:24
[Other] vtk mesh or Abaqus mesh to OpenFOAM	bigphil	OpenFOAM Meshing & Mesh Conversion	27	November 23, 2015 18:31
[Salome] SALOME to OpenFOAM mesh for SRF/MRF computing	davidmd	OpenFOAM Meshing & Mesh Conversion	6	February 20, 2014 04:03
Converting Salome hybrid mesh to OpenFOAM	Arnoldinho	OpenFOAM	4	March 28, 2012 11:24

March 7, 2014, 09:16		#3
Sören Sander Member Sören Sander Join Date: Sep 2012 Location: Germany Posts: 43 Rep Power: 14	Hi Kruno, I could not solve the problem. Actually, my solution was to use another meshing tool...