[CAD formats] Stl file export

Joanna Huang · January 9, 2013, 13:04

Hello, everyone:

I wonder what software is the best to export .stl file which is used in openFoam.
The .stl file I need contain many patchs/regions with different names, but I don't know how to specipy it, The Catia sofeware can just export one solid. How Can I deal with it.

Doug68 · January 9, 2013, 21:19

I've read what you need to do is create separate STL in ASCII format then you can edit them together into one STL file. The header part for each section then being used for the patch name.

This is something I've yet to try myself so I hope I'm not telling you garbage.

Joanna Huang · January 10, 2013, 06:21

Thank you so much for your reply, I will try that. So there isn't any simple way to export it at one time.

wyldckat · January 10, 2013, 06:47

Greetings to all!

Blender and Meshlab are the usual favourites for manipulating STL files.

Best regards,
Bruno

Joanna Huang · January 10, 2013, 08:08

Quote:

Originally Posted by wyldckat

Greetings to all!

Blender and Meshlab are the usual favourites for manipulating STL files.

Best regards,
Bruno

But Blender can not import .igs file which is not every convinient, right? And can blender specify different parts name and export .stl file at one time?

wyldckat · January 10, 2013, 17:21

Quote:

Originally Posted by Joanna Huang

But Blender can not import .igs file which is not every convinient, right? And can blender specify different parts name and export .stl file at one time?

Both Blender and Meshlab can import STL. Then you can manipulate the STL and export in parts.

Ah, I had almost forgotten about this tutorial: http://openfoamwiki.net/index.php/Tut_andrew_blender - it's a bit outdated, since it was made when Blender was still on 2.49b, if I'm not mistaken.

January 9, 2013, 13:04	Stl file export	#1
Joanna Huang New Member Sha Huang Join Date: Dec 2012 Posts: 22 Rep Power: 13	Hello, everyone: I wonder what software is the best to export .stl file which is used in openFoam. The .stl file I need contain many patchs/regions with different names, but I don't know how to specipy it, The Catia sofeware can just export one solid. How Can I deal with it.

January 10, 2013, 06:47		#4
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,982 Blog Entries: 45 Rep Power: 128	Greetings to all! Blender and Meshlab are the usual favourites for manipulating STL files. Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom Thermophysical Properties	wsmith02	OpenFOAM	4	June 1, 2023 15:30
[foam-extend.org] Problems installing foam-extend-4.0 on openSUSE 42.2 and Ubuntu 16.04	ordinary	OpenFOAM Installation	19	September 3, 2019 19:13
[foam-extend.org] problem when installing foam-extend-1.6	Thomas pan	OpenFOAM Installation	7	September 9, 2015 22:53
[swak4Foam] Problem installing swak_2.x for OpenFoam-2.4.0	towanda	OpenFOAM Community Contributions	6	September 5, 2015 22:03
Problem compiling a custom Lagrangian library	brbbhatti	OpenFOAM Programming & Development	2	July 7, 2014 12:32

January 9, 2013, 21:19		#2
Doug68 Member Join Date: Nov 2010 Posts: 62 Rep Power: 16	I've read what you need to do is create separate STL in ASCII format then you can edit them together into one STL file. The header part for each section then being used for the patch name. This is something I've yet to try myself so I hope I'm not telling you garbage.

January 10, 2013, 06:21		#3
Joanna Huang New Member Sha Huang Join Date: Dec 2012 Posts: 22 Rep Power: 13	Thank you so much for your reply, I will try that. So there isn't any simple way to export it at one time.