 |
 |
 |
|
|
|
[Sponsors] | ||||
[blockMesh] --> FOAM FATAL ERROR: Trying to specify a boundary face |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 30, 2012, 11:11
|
--> FOAM FATAL ERROR: Trying to specify a boundary face
|
#1 |
|
Member
Alexander A
Join Date: Jun 2012
Posts: 53
Rep Power: 14  |
Hi,
I am getting the following error message when I type blockMesh in the terminal: // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Creating block mesh from "/home/gzabos/OpenFOAM/gzabos-2.1.1/run/tutorials/incompressible/pimpleDyMFoam/hybro2/constant/polyMesh/blockMeshDict" Creating curved edges Creating topology blocks Creating topology patches Reading patches section Creating block mesh topology Reading physicalType from existing boundary file Default patch type set to empty --> FOAM FATAL ERROR: Trying to specify a boundary face 4(22 19 219 222) on the face on cell 6 which is either an internal face or already belongs to some other patch. This is face 0 of patch 0 named profile1. From function polyMesh::setTopology ( const cellShapeList& cellsAsShapes, const faceListList& boundaryFaces, const wordList& boundaryPatchNames, labelList& patchSizes, labelList& patchStarts, label& defaultPatchStart, label& nFaces, cellList& cells ) in file meshes/polyMesh/polyMeshFromShapeMesh.C at line 360. FOAM aborting My blockMeshDict file looks as follows: /*--------------------------------*- C++ -*----------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 2.1.1 | | \\ / A nd | Web: www.OpenFOAM.org | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ FoamFile { version 2.0; format ascii; class dictionary; object blockMeshDict; } // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // convertToMeters 0.001; vertices ( (0 0 0) //0// (-50 0 141.421) //1// (50 0 141.421) //2// (94.281 0 266.667) //3// (-94.281 0 266.667) //4// (0 0 150) //5// (0 0 200) //6// (-94.281 0 333.333) //7// (-128.866 0 431.154) //8// (-150 0 424.264) //9// (-100 0 300) //10// (150 0 424.264) //11// (128.866 0 431.154) //12// (94.281 0 333.333) //13// (100 0 300) //14// (0 0 450) //15// (0 0 400) //16// (-75 0 290) //17// (75 0 290) //18// (75 0 300) //19// (75 0 310) //20// (-75 0 310) //21// (-75 0 300) //22// (224.488 0 172.062) //23// (88.149 0 121.366) //24// (166.216 0 228.85) //25// (357.158 0 273.748) //26// (264.448 0 364.098) //27// (149.95 0 -3.851) //28// (282.75 0 -7.262) //29// (190.211 0 61.803) //30// (287.884 0 192.672) //31// (370.23 0 255.793) //32// (262.14 0 164.034) //33// (449.852 0 -11.554) //34// (449.874 0 10.675) //35// (346.153 0 13.339) //36// (316.219 0 -2.401) //37// (298.983 0 18.286) //38// (308.493 0 21.376) //39// (318.004 0 24.466) //40// (271.651 0 167.125) //41// (262.141 0 164.034) //42// (252.630 0 160.944) //43// (380.423 0 123.607) //44// (427.975 0 139.058) //45// (123.572 0 -85.029) //46// (142.666 0 -46.331) //47// (233.011 0 -160.331) //48// (269.013 0 -87.362) //49// (370.718 0 -255.085) //50// (428.009 0 -139.031) //51// (42.674 0 -143.801) //52// (88.168 0 -121.353) //53// (80.468 0 -271.155) //54// (117.557 0 -161.803) //55// (119.653 0 -325.089) //56// (115.659 0 -286.789) //57// (128.024 0 -431.405) //58// (149.171 0 -424.556) //59// (357.681 0 -273.065) //60// (272.203 0 -214.255) //61// (275.237 0 -183.927) //62// (235.114 0 -323.607) //63// (264.503 0 -364.058) //64// (109.781 0 -278.699) //65// (115.659 0 -286.789) //66// (121.537 0 -294.879) //67// (242.89 0 -206.711) //68// (237.012 0 -198.621) //69// (231.134 0 -190.531) //70// (119.053 0 91.249) //71// (-42.681 0 -143.8) //72// (0.023 0 -150) //73// (-80.479 0 -271.152) //74// (0.043 0 -282.843) //75// (-128.042 0 -431.399) //76// (0.0685 0 -450.0) //77// (-123.576 0 -85.023) //78// (-88.168 0 -121.353) //79// (-233.018 0 -160.321) //80// (-117.557 0 -161.803) //81// (-272.203 0 -214.255) //82// (-237.012 0 -198.621) //83// (-370.729 0 -255.069) //84// (-357.681 0 -273.065) //85// (-264.503 0 -364.058) //86// (-235.114 0 -323.607) //87// (-149.171 0 -424.556) //88// (-119.653 0 -325.089) //89// (-95.434 0 -301.484) //90// (-231.134 0 -190.531) //91// (-237.012 0 -198.621) //92// (-242.89 0 -206.711) //93// (-121.537 0 -294.879) //94// (-115.659 0 -286.789) //95// (-109.781 0 -278.699) //96// (-149.951 0 -3.844) //97// (-142.651 0 -46.375) //98// (-282.75 0 -7.25) //99// (-268.986 0 -87.442) //100// (-449.852 0 -11.535) //101// (-427.954 0 -139.123) //102// (-119.049 0 91.254) //103// (-142.659 0 46.353) //104// (-224.481 0 172.071) //105// (-190.211 0 61.803) //106// (-287.884 0 192.672) //107// (-254.415 0 187.811) //108// (-357.147 0 273.763) //109// (-370.23 0 255.793) //110// (-427.975 0 139.058) //111// (-449.874 0 10.675) //112// (-346.153 0 13.339) //113// (-316.219 0 -2.4) //114// (-252.63 0 160.944) //115// (-262.14 0 164.034) //116// (-271.651 0 167.125) //117// (-318.004 0 24.466) //118// (-308.493 0 21.376) //119// (-298.983 0 18.286) //120// (-380.423 0 123.607) //121// (-88.186 0 121.339) //122// (-166.286 0 228.799) //123// (-264.559 0 364.018) //124// (-357.681 0 -1500) //125// (-149.171 0 -1500) //126// (-128.042 0 -1500) //127// (128.024 0 -1500) //128// (149.171 0 -1500) //129// (357.681 0 -1500) //130// (3000 0 -273.065) //131// (3000 0 -255.085) //132// (3000 0 -11.554) //133// (3000 0 10.675) //134// (3000 0 255.793) //135// (3000 0 273.748) //136// (3000 0 -1500) //137// (3000 0 1500) //138// (357.158 0 1500) //139// (150 0 1500) //140// (128.866 0 1500) //141// (-128.866 0 1500) //142// (-150 0 1500) //143// (-357.147 0 1500) //144// (-2000 0 1500) //145// (-2000 0 273.763) //146// (-2000 0 255.793) //147// (-2000 0 10.675) //148// (-2000 0 -11.535) //149// (-2000 0 -255.069) //150// (-2000 0 -273.065) //151// (142.659 0 46.353) //152// (-2000 0 -1500) //153// ... (-2000 10 -1500) //353// ); blocks ( hex (1 2 202 201 4 3 203 204) (10 1 4) simpleGrading (1 1 1) //A1// hex (7 13 213 207 8 12 212 208) (10 1 5) simpleGrading (1 1 1) //A2// hex (13 3 203 213 12 11 211 212) (1 1 5) simpleGrading (1 1 1) //A3// hex (4 7 207 204 9 8 208 209) (1 1 5) simpleGrading (1 1 1) //A4// hex (19 3 203 219 19 13 213 219) (4 1 1) simpleGrading (1 1 1) //A5// hex (4 22 222 204 7 22 222 207) (4 1 1) simpleGrading (1 1 1) //A6// hex (4 3 203 204 22 19 219 222) (10 1 4) simpleGrading (1 1 1) //A7// hex (22 19 219 222 7 13 213 207) (10 1 4) simpleGrading (1 1 1) //A8// hex (2 71 271 202 3 23 223 203) (10 1 4) simpleGrading (1 1 1) //A1// hex (3 23 223 203 11 26 226 211) (10 1 5) simpleGrading (1 1 1) //A2// hex (71 28 228 271 23 29 229 223) (10 1 4) simpleGrading (1 1 1) //B1// hex (31 36 236 231 32 35 235 232) (10 1 5) simpleGrading (1 1 1) //B2// hex (36 29 229 236 35 34 234 235) (1 1 5) simpleGrading (1 1 1) //B3// hex (23 31 231 223 26 32 232 226) (1 1 5) simpleGrading (1 1 1) //B4// hex (39 29 229 239 39 36 236 239) (4 1 1) simpleGrading (1 1 1) //B5// hex (23 42 242 223 31 42 242 231) (4 1 1) simpleGrading (1 1 1) //B6// hex (23 29 229 223 42 39 239 242) (10 1 4) simpleGrading (1 1 1) //B7// hex (42 39 239 242 31 36 236 231) (10 1 4) simpleGrading (1 1 1) //B8// hex (28 46 246 228 29 48 248 229) (10 1 4) simpleGrading (1 1 1) //B1// hex (29 48 248 229 34 50 250 234) (10 1 5) simpleGrading (1 1 1) //B2// hex (46 52 252 246 48 54 254 248) (10 1 4) simpleGrading (1 1 1) //C1// hex (61 56 256 261 60 59 259 260) (10 1 5) simpleGrading (1 1 1) //C2// hex (56 54 254 256 59 58 258 259) (1 1 5) simpleGrading (1 1 1) //C3// hex (48 61 261 248 50 60 260 250) (1 1 5) simpleGrading (1 1 1) //C4// hex (48 69 269 248 61 69 269 261) (4 1 1) simpleGrading (1 1 1) //C5// hex (66 54 254 266 66 56 256 266) (4 1 1) simpleGrading (1 1 1) //C6// hex (48 54 254 248 69 66 266 269) (10 1 4) simpleGrading (1 1 1) //C7// hex (69 66 266 269 61 56 256 261) (10 1 4) simpleGrading (1 1 1) //C8// hex (52 72 272 252 54 74 274 254) (10 1 4) simpleGrading (1 1 1) //C1// hex (54 74 274 254 58 76 276 258) (10 1 5) simpleGrading (1 1 1) //C2// hex (72 78 278 272 74 80 280 274) (10 1 4) simpleGrading (1 1 1) //D1// hex (89 82 282 289 88 85 285 288) (10 1 5) simpleGrading (1 1 1) //D2// hex (82 80 280 282 85 84 284 285) (1 1 5) simpleGrading (1 1 1) //D3// hex (74 89 289 274 76 88 288 276) (1 1 5) simpleGrading (1 1 1) //D4// hex (92 80 280 292 92 82 282 292) (4 1 1) simpleGrading (1 1 1) //D5// hex (74 95 295 274 89 95 295 289) (4 1 1) simpleGrading (1 1 1) //D6// hex (74 80 280 274 95 92 292 295) (10 1 4) simpleGrading (1 1 1) //D7// hex (95 92 292 295 89 82 282 289) (10 1 4) simpleGrading (1 1 1) //D8// hex (78 97 297 278 80 99 299 280) (10 1 4) simpleGrading (1 1 1) //D1// hex (80 99 299 280 84 101 301 284) (10 1 5) simpleGrading (1 1 1) //D2// hex (97 103 303 297 99 105 305 299) (10 1 4) simpleGrading (1 1 1) //E1// hex (113 107 307 313 112 110 310 312) (10 1 5) simpleGrading (1 1 1) //E2// hex (107 105 305 307 110 109 309 310) (1 1 5) simpleGrading (1 1 1) //E3// hex (99 113 313 299 101 112 312 301) (1 1 5) simpleGrading (1 1 1) //E4// hex (116 105 305 316 116 107 307 316) (4 1 1) simpleGrading (1 1 1) //E5// hex (99 119 319 299 113 119 319 313) (4 1 1) simpleGrading (1 1 1) //E6// hex (99 105 305 299 119 116 316 319) (10 1 4) simpleGrading (1 1 1) //E7// hex (119 116 316 319 113 107 307 313) (10 1 4) simpleGrading (1 1 1) //E8// hex (103 1 201 303 105 4 204 305) (10 1 4) simpleGrading (1 1 1) //E1// hex (105 4 204 305 109 9 209 309) (10 1 5) simpleGrading (1 1 1) //E2// hex (153 125 325 353 151 85 285 351) (42 1 31) simpleGrading (1 1 1) //T1// hex (125 126 326 325 85 88 288 285) (10 1 31) simpleGrading (1 1 1) //T2// hex (126 127 327 326 88 76 276 288) (1 1 31) simpleGrading (1 1 1) //T3// hex (127 128 328 327 76 58 258 276) (10 1 31) simpleGrading (1 1 1) //T4// hex (128 129 329 328 58 59 259 258) (1 1 31) simpleGrading (1 1 1) //T5// hex (129 130 330 329 59 60 260 259) (10 1 31) simpleGrading (1 1 1) //T6// hex (130 137 337 330 60 131 331 260) (68 1 31) simpleGrading (1 1 1) //T7// hex (60 131 331 260 50 132 332 250) (68 1 1) simpleGrading (1 1 1) //T8// hex (50 132 332 250 34 133 333 234) (68 1 10) simpleGrading (1 1 1) //T9// hex (34 133 333 234 35 134 334 235) (68 1 1) simpleGrading (1 1 1) //T10// hex (35 134 334 235 32 135 335 232) (68 1 10) simpleGrading (1 1 1) //T11// hex (32 135 335 232 26 136 336 226) (68 1 1) simpleGrading (1 1 1) //T12// hex (26 136 336 226 139 138 338 339) (68 1 31) simpleGrading (1 1 1) //T13// hex (11 26 226 211 140 139 339 340) (10 1 31) simpleGrading (1 1 1) //T14// hex (12 11 211 212 141 140 340 341) (1 1 31) simpleGrading (1 1 1) //T15// hex (8 12 212 208 142 141 341 342) (10 1 31) simpleGrading (1 1 1) //T16// hex (9 8 208 209 143 142 342 343) (1 1 31) simpleGrading (1 1 1) //T17// hex (109 9 209 309 144 143 343 344) (10 1 31) simpleGrading (1 1 1) //T18// hex (146 109 309 346 145 144 344 345) (42 1 31) simpleGrading (1 1 1) //T19// hex (147 110 310 347 146 109 309 346) (42 1 1) simpleGrading (1 1 1) //T20// hex (148 112 312 348 147 110 310 347) (42 1 10) simpleGrading (1 1 1) //T21// hex (149 101 301 349 148 112 312 348) (42 1 1) simpleGrading (1 1 1) //T22// hex (150 84 284 350 149 101 301 349) (42 1 10) simpleGrading (1 1 1) //T23// hex (151 85 285 351 150 84 284 350) (42 1 1) simpleGrading (1 1 1) //T24// ); edges ( arc 1 2 (0 0 150) //A1// arc 201 202 (0 10 150) //A2//... arc 309 209 (-264.559 10 364.018) //E6// ); patches ( wall profile1 ( (22 19 219 222) ) wall profile2 ( (42 39 239 242) ) wall profile3 ( (69 66 266 269) ) wall profile4 ( (95 92 292 295) ) wall profile5 ( (119 116 316 319) ) patch wing1 ( (4 204 203 3) (3 203 213 13) (7 13 213 207) (4 7 207 204) ) patch wing2 ( (23 223 229 29) (29 229 236 36) (31 36 236 231) (23 31 231 223) ) patch wing3 ( (48 248 254 54) (54 254 256 56) (61 56 256 261) (48 61 261 248) ) patch wing4 ( (74 274 280 80) (80 280 282 82) (89 82 282 289) (74 89 289 274) ) patch wing5 ( (99 299 305 105) (105 305 307 107) (113 107 307 313) (99 113 313 299) ) patch cyclorotor ( (9 8 208 209) (8 12 212 208) (12 11 211 212) (11 26 226 211) (26 32 232 226) (32 35 235 232) (35 34 234 235) (34 50 250 234) (50 60 260 250) (60 59 259 260) (59 58 258 259) (58 76 276 258) (76 88 288 276) (88 85 285 288) (85 84 284 285) (84 101 301 284) (101 112 312 301) (112 110 310 312) (110 109 309 310) (109 9 209 309) ) ); boundary ( flettner { type wall; faces ( (1 2 202 201) (2 71 271 202) (71 28 228 271) (28 46 246 228) (46 52 252 246) (52 72 272 252) (72 78 278 272) (78 97 297 278) (97 103 303 297) (103 1 201 303) ); } ); mergePatchPairs ( ); // ************************************************** *********************** // Can anyone help me with this error? Thanks Alexander |
|
|
|
|
|
July 31, 2012, 04:50
|
Help needed, I am absolute beginner!
|
#2 |
|
Member
Alexander A
Join Date: Jun 2012
Posts: 53
Rep Power: 14 |
Hi,
maybe my question is to easy but I am absolute beginner. If anyone could give me advice what to do to solve this error. Thank you very much in advance. I appreciate any help. Regards Alexander |
|
|
|
|
|
|
July 31, 2012, 05:11
|
|
#3 |
|
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128  |
Greetings Alexander,
Try this: Code:
paraFoam -block Best regards, Bruno
__________________
|
|
|
|
|
|
|
July 31, 2012, 05:31
|
|
#4 |
|
Member
Alexander A
Join Date: Jun 2012
Posts: 53
Rep Power: 14 |
Hi Bruno,
Thanks for your advice. The code doesen't work I get the same error message and paraFoam aborts. I could view the whole Mesh in paraFoam before I added the lines for the patches. The mesh is ok but when I want to create the patches I get the error message. So It has something to do with lines where I define the patches. Are there maybe special rules to create patches which I didn't take in to consideration? Thanks for any help. Greetings, Alexander |
|
|
|
|
|
|
July 31, 2012, 05:35
|
|
#5 |
|
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128 |
Hi Alexander,
I haven't tested the dictionary you gave, but my guess is that your new patch might be floating. In other words, if you define a patch in the middle of another already existing patch, it will not work with blockMesh. You might find it easier to use the createPatch utility, which allows you to create patches in already existing meshes. Search for examples: Code:
find $WM_PROJECT_DIR -name createPatchDict Bruno
__________________
|
|
|
|
|
|
|
July 31, 2012, 07:18
|
|
#6 |
|
Member
Alexander A
Join Date: Jun 2012
Posts: 53
Rep Power: 14 |
Hi Bruno,
I visualized the mesh in paraFoam with only one patch defined and I can see the problem. The problem is that the patch should only comprise an inner cylinder in the mesh but instead of that the patch comprises now everything around the inner cylinder. It is as you said: the other patches would then lay in this patch. but how can I define the direction of the patch so that it comprises only the inner cylinder and not the area around it? Another question is concerning the createPatch utillity can I just copy the file in the system directory of my case or do I need to register this file in any other files? Many thanks in advance. Greetings, Alex |
|
|
|
|
|
|
July 31, 2012, 07:28
|
|
#7 |
|
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128 |
Hi Alex,
Q1: I'm not sure I understand you question. But my guess is that the following should help you to more easily create a "blockMeshDict" interactively via Blender: http://openfoamwiki.net/index.php/SwiftBlock  Q2: Simply copy the "createPatchDict" to your case's "system" folder, edit the copied file and run createPatch in the case folder. Best regards, Bruno
__________________
|
|
|
|
|
|
|
July 31, 2012, 08:05
|
|
#8 |
|
Member
Alexander A
Join Date: Jun 2012
Posts: 53
Rep Power: 14 |
Hi Bruno
I get the following error when I type creatPatch: /*---------------------------------------------------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 2.1.1 | | \\ / A nd | Web: www.OpenFOAM.org | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ Build : 2.1.1-221db2718bbb Exec : createPatch Date : Jul 31 2012 Time : 13:00:41 Host : "ubuntu" PID : 3199 Case : /home/gzabos/OpenFOAM/gzabos-2.1.1/run/tutorials/incompressible/pimpleDyMFoam/hybro2 nProcs : 1 sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). fileModificationChecking : Monitoring run-time modified files using timeStampMaster allowSystemOperations : Disallowing user-supplied system call operations // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Reading createPatchDict Create polyMesh for time = 0 Adding new patch wing1 as patch 2 from { type patch; } --> FOAM FATAL ERROR: Cannot find file "" in directory "polyMesh/sets" in times 0 down to constant From function Time::findInstance(const fileName&, const word&, const IOobject::readOption, const word&) in file db/Time/findInstance.C at line 140. FOAM exiting Do you know what the reason is? Geetings, Alex |
|
|
|
|
|
|
July 31, 2012, 09:59
|
|
#9 |
|
Member
Alexander A
Join Date: Jun 2012
Posts: 53
Rep Power: 14 |
Hi Bruno,
Can it be that if the same vertex is a point in the face between two blocks and I want to define a patch which has this face as border between these two blocks it doesn't work? Thanks in advance, Alex |
|
|
|
|
|
|
July 31, 2012, 13:21
|
|
#10 | |
|
Disabled
Join Date: Mar 2011
Posts: 174
Rep Power: 15 |
Quote:
|
||
|
|
|
||
|
July 31, 2012, 17:57
|
|
#11 | |
|
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128 |
Greetings to all!
@Alex: Quote:
Code:
Cannot find file "" in directory "polyMesh/sets" in times 0 down to constant Here's a good example, shown in tutorial "incompressible/pimpleFoam/elipsekkLOmega":
Best regards, Bruno
__________________
|
||
|
|
|
||
|
August 1, 2012, 09:48
|
|
#12 |
|
Member
Alexander A
Join Date: Jun 2012
Posts: 53
Rep Power: 14 |
Hi,
I found the reason for the error message: --> FOAM FATAL ERROR: Trying to specify a boundary face 4(22 19 219 222) on the face on cell 6 which is either an internal face or already belongs to some other patch. This is face 0 of patch 0 named profile1. When defining a face of a patch, the vertices of the neighbor blocks or patches must not have the same vertix number, you have to create double vertices, means same point but another vertix number. Thanks to all for helping, Alex |
|
|
|
|
|
|
September 20, 2012, 04:31
|
|
#13 |
|
Member
|
And in reference to the cannot find file " " in directory polymesh/sets, in my case it occurred because I ran topoSet with file compression activated in the controlDict and it just didn't recognize the file because of the format. When running topoSet with file compression off this error desappears.
MC
__________________
Mc |
|
|
|
|
|
|
February 15, 2014, 07:48
|
|
#14 |
|
New Member
Karla Mora Ulate
Join Date: Jan 2014
Posts: 5
Rep Power: 12 |
Hi, I am using createPatchDict to create a set of burners but the follow error shows:
Code:
Read 392 faces from faceSet fBurner1a
--> FOAM FATAL ERROR:
Face 7501 specified in set fBurner1a is not an external face of the mesh.
This application can only repatch existing boundary faces.
From function createPatch
in file createPatch.C at line 727.
FOAM exiting
Code:
FoamFile
{
version 2.0;
format ascii;
class dictionary;
object createPatchDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
pointSync false;
patches
(
{
name Burner1a;
patchInfo
{ type patch; }
constructFrom set;
set fBurner1a;
}
FoamFile
{
version 2.0;
format ascii;
class dictionary;
object topoSetDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
actions
(
{
name fBurner1a;
type faceSet;
action new;
source boxToFace;
sourceInfo
{
box (16.2 3.35 0.00) (16.8 3.95 0.30);
}
}
Regards, Karla Last edited by wyldckat; February 15, 2014 at 11:21. Reason: Added [CODE][/CODE] |
|
|
|
|
|
|
February 15, 2014, 11:24
|
|
#15 |
|
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128 |
Greetings Karla and welcome to the forum!
I suspect that the selection box is too big and is selecting more faces than the ones you want to select, from the inside of the mesh. Have a look into this post: http://www.cfd-online.com/Forums/ope...tml#post473021 post #45 - I explained there how this kind of selection should be done. In addition, you might want to read the whole thread (http://www.cfd-online.com/Forums/ope...egionfoam.html), since it might have some more information that might come in handy to you Best regards, Bruno
__________________
|
|
|
|
|
|
|
February 15, 2014, 12:50
|
|
#16 |
|
New Member
Karla Mora Ulate
Join Date: Jan 2014
Posts: 5
Rep Power: 12 |
Thank you Bruno,
I tried to change the dimensions of my boxes with your suggestion from post #45, but I still having the same error. Can you look my files and see if you can find the error?https://www.dropbox.com/sh/hbp0ax4cy64b786/rPbSDGiU72 I really appreciate your help, I am working in my thesis and this is made my crazy  .Karla |
|
|
|
|
|
|
February 15, 2014, 13:35
|
|
#17 |
|
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128 |
Hi Karla,
The first attached image demonstrates where your first box is located, in comparison with the mesh:
The correct definition is shown in the second image, where the selection box is very thin, so that it will not select faces from other cells, other the ones you want from the outer surface. Keep in mind that faces are selected as long as the selection box includes the centres of faces of cells. Best regards, Bruno
__________________
|
|
|
|
|
|
|
February 16, 2014, 10:31
|
|
#18 |
|
New Member
Karla Mora Ulate
Join Date: Jan 2014
Posts: 5
Rep Power: 12 |
Thank you Bruno!!!!!!!!!!! Now it is working. I have an error in fireFoam but I read one of your old post and I think my mistake is the definition of the boundary condition. Thank you so much for your help.
|
|
|
|
|
|
|
April 12, 2014, 08:50
|
|
#19 | |
|
Member
Join Date: May 2013
Posts: 51
Rep Power: 13 |
Quote:
|
||
|
|
|
||
|
November 25, 2014, 06:32
|
|
#20 |
|
New Member
Join Date: Nov 2014
Posts: 11
Rep Power: 12 |
How did you solve this problem?? I am a very beginner and i'm still stuck at this point!
Trying to specify a boundary face 4(1 5 6 2) on the face on cell 0 which is either an internal face or already belongs to some other patch. This is face 0 of patch 2 named outlet2. Thak you, Best regards |
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Other] mesh airfoil NACA0012 | anand_30 | OpenFOAM Meshing & Mesh Conversion | 13 | March 7, 2022 18:22 |
| Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 08:30 |
| [blockMesh] Errors during blockMesh meshing | Madeleine P. Vincent | OpenFOAM Meshing & Mesh Conversion | 51 | May 30, 2016 11:51 |
| [Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 06:50 |
| RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 05:05 |
1Likes
Linear Mode
