[gschaider]

Originally Posted by gschaider

As noted in the other posting I just commented the offending lines out (will have a look on how to port this to Mac OS X later. Unless somebody is faster. I sincerely hope so). This patch makes the whole thing compile on MacOSX. The damBreak-case (blockMesh/setFields/interFoam) worked without problems. As always I didn't bother to make paraFoam work (in difference to the the coded stuff I currently have no intention to do so).

In the attached tar you'll find three files:
- patch to OpenFOAM itself.
- patch to the thirdParty-directory
- A file that goes to ~/OpenFOAM/site/2.0.x/ This tells OF that it should use the system-OpenMPI and gcc 4.5 from MacPorts (the Apple gcc 4.2 chockes on some SubField-stuff)

An comments/improvements welcome

Bernhard

One thing that was bothering me about the patch till now was that Floating Point Exceptions were not caught and OF happily kept calculating even when there were no numbers to calculate. Attached is a patch that fixes this and a cummulative patch to 2.0.x that incorporates this and previous patches to Mac OS X (the one with v4 int he name).

PS: No patch for the current ThirdParty-2.0.x. Sorry. I recommend downloading ThirdParty-2.0.0 and using the old patch for this.

[mgdenno]

Sushant,

Thanks for providing the compiled versions of OF on your website. Are they for Lion? It says 10.6 and 10.7 in your signature, but only 10.6 on your website.

Also do they have the latest patches applied?

Thanks,

MD

[sushant]

Originally Posted by mgdenno

Sushant,

Thanks for providing the compiled versions of OF on your website. Are they for Lion? It says 10.6 and 10.7 in your signature, but only 10.6 on your website.

Also do they have the latest patches applied?

Thanks,

MD

Hi Matthew,

The binaries so far are only for 10.6. Sorry for the confusion!

I should be able to post a Lion dmg soon, I have just been a little occupied, trying to find a way to make ONE distribution that works for both 10.6/10.7.

I need to include BG's FPE patch (v4) but the ones before that are incorporated.

Thanks!
Sushant

[mgdenno]

That would be great!

I will probably wait for your binaries...unless I get restless, then I may try and compile myself.

Out of curiosity, are you using the openmpi from Thirdparty now that Lion doesn't include it? What needs to be done to compile it? Is it as simple as ./configure, make, make install?

Thanks

[sushant]

Originally Posted by mgdenno

Out of curiosity, are you using the openmpi from Thirdparty now that Lion doesn't include it? What needs to be done to compile it?

Yes. In the site/2.0.x/prefs.sh file just change WM_MPLIB to OPENMPI instead of SYSTEMOPENMPI. Then go into ThirdParty (2.0.0!) and do ./Allwmake, assuming you have a working Gcc45 or Gcc46 (and have the other patches applied). I haven't had any serious issues compiling the supplied openmpi-1.5.3 that way, so I hope your mileage doesn't vary.

[mgdenno]

Okay, great!

So, last question...I hope. Does the Thirdparty directory in the image on your website contain the 2.0.0 source and have the patches applied? I could do ./Allwmake in the Thirdparty directory from you and it should work?

Thanks again,

MD

[mgdenno]

Hello Again,

So I decided that I would try and compile ThirdParty (openmpi) myself and it went pretty well and seemed to work as expected. So, since Thirdparty went so well I decided that I would download clean 2.0.1 and apply the patches and compile...now I am having trouble. I am getting the following error.

from solidEquilibriumDisplacementFoam.C:38:
/Users/matt/OpenFOAM/OpenFOAM-2.0.x/src/OpenFOAM/lnInclude/face.H:52:22: fatal error: pointHit.H: No such file or directory
compilation terminated.
make[2]: *** [Make/darwinIntel64Gcc45DPOpt/solidEquilibriumDisplacementFoam.o] Error 1
make[2]: Target `/Users/matt/OpenFOAM/OpenFOAM-2.0.x/platforms/darwinIntel64Gcc45DPOpt/bin/solidEquilibriumDisplacementFoam' not remade because of errors.
make[1]: *** [solidEquilibriumDisplacementFoam] Error 2
make[1]: Target `application' not remade because of errors.
make: *** [stressAnalysis] Error 2
make: Target `application' not remade because of errors.

So I tried to track down the missing file and found one the same name but that starts with a capital "P" - PointHit.H

Is this a bug? Am I missing something? It is the only file in the directory that starts with a capital letter...seems inconsistent.

There are also a number of other similar errors that look like they could be caused by the same thing, but I haven't tracked each one down yet.

I am confused.

MD

[mgdenno]

I am still having a hard time compiling OpenFOAM on Mac OS X 10.7; I am hoping someone can help me see where I am going wrong. Here is what I did:

On a clean install of 10.7, I first installed XCode Tools 4.2 from the app store. Then installed macports 2.0.3 and installed gcc45 through macports (gcc46 wouldn't install). Selected gcc45 as the default gcc with:

sudo port select gcc mp-gcc45

I started with a case-sensative disk image which I mounted at ~/OpenFOAM using

hdiutil attach "$HOME/OpenFOAM_Images/Mac-OF-2.0.x.sparseimage" -mountpoint "$HOME/OpenFOAM" > /dev/null

I copied OpenFOAM-2.0.1 and ThirdParty-2.0.0 to the disk image as OpenFOAM-2.0.x and ThirdParty-2.0.x, respectively. OpenFOAM and ThirdParty were both downloaded from: http://sourceforge.net/projects/foam/files/foam/

I edited OpenFOAM-2.0.x/etc/bashrc so that WM_PROJECT_VERSION=2.0.x (in place of OpenFOAM-2.0.1).

Sourced the bash file with:

. ~/OpenFOAM/OpenFOAM-2.0.x/etc/bashrc

Pasted the prefs.sh file from the patches to ~/OpenFOAM/site/2.0.x/prefs.sh and changed SYSTEMOPENMPI to OPENMPI.

Since I am going to use the Paraview downloaded from Kitware, I deleted the paraview directory from the ThirdParty directory.

I applied the following ThirdParty and OpenFOAM patches from this thread. In the ThirdParty-2.0.x and OpenFOAM-2.0.x directorys I applied the following patchs:

patch -p1 < ThirdParty-2.0.0-Mac.patch
patch -p1 < OpenFOAM-2.0.x-Mac_v4_FPE.patch

The ThirdParty patch applied with no issues, however I received the following errors when applying the OpenFOAM patch:

patching file src/parallel/decompose/ptscotchDecomp/Make/options
Hunk #1 FAILED at 8.
1 out of 1 hunk FAILED -- saving rejects to file src/parallel/decompose/ptscotchDecomp/Make/options.rej
patching file src/parallel/decompose/scotchDecomp/Make/options
Hunk #1 FAILED at 12.
1 out of 1 hunk FAILED -- saving rejects to file src/parallel/decompose/scotchDecomp/Make/options.rej

While I suspected this was a problem, I tried to compile anyway and received the following error, which looks like it is realted to the problem with the scotch patch:

========================================
Build Scotch decomposition library scotch_5.1.11
    /Users/matt/OpenFOAM/ThirdParty-2.0.x/platforms/DarwinGcc45/scotch_5.1.11
+ cd scotch_5.1.11/src
+ prefixDIR=/Users/matt/OpenFOAM/ThirdParty-2.0.x/platforms/DarwinGcc45/scotch_5.1.11
+ libDIR=/Users/matt/OpenFOAM/ThirdParty-2.0.x/platforms/DarwinGcc45DPOpt/lib
+ mkdir -p /Users/matt/OpenFOAM/ThirdParty-2.0.x/platforms/DarwinGcc45/scotch_5.1.11
+ mkdir -p /Users/matt/OpenFOAM/ThirdParty-2.0.x/platforms/DarwinGcc45DPOpt/lib
+ configOpt='prefix=/Users/matt/OpenFOAM/ThirdParty-2.0.x/platforms/DarwinGcc45/scotch_5.1.11 libdir=/Users/matt/OpenFOAM/ThirdParty-2.0.x/platforms/DarwinGcc45DPOpt/lib'
+ makeFile=../../etc/wmakeFiles/scotch/Makefile.inc.i686_pc_linux2.shlib-OpenFOAM
+ '[' '' == darwin ']'
+ '[' -f ../../etc/wmakeFiles/scotch/Makefile.inc.i686_pc_linux2.shlib-OpenFOAM -a '!' -f Makefile.inc ']'
+ rm -f Makefile.inc
+ ln -s ../../etc/wmakeFiles/scotch/Makefile.inc.i686_pc_linux2.shlib-OpenFOAM Makefile.inc
+ '[' -f Makefile.inc ']'
+ unset configEnv
+ '[' gcc '!=' gcc ']'
+ make realclean
mkdir ../bin
mkdir ../include
mkdir ../lib
(cd libscotch ;      make realclean)
rm -f *~ *.o lib*.so parser_yy.c parser_ly.h parser_ll.c *scotch.h *scotchf.h y.output dummysizes
(cd scotch ;         make realclean)
rm -f *~ *.o acpl amk_ccc amk_fft2 amk_grf amk_hy amk_m2 amk_p2 atst gbase gcv *ggath *gmap gmk_hy gmk_m2 gmk_m3 gmk_msh gmk_ub2 gmtst *gord gotst gout *gpart *gscat *gtst mcv mmk_m2 mmk_m3 mord mtst
(cd libscotchmetis ; make realclean)
rm -f *~ *.o lib*.so
rm -f ../bin/* ../include/* ../lib/*
+ make -j 1 scotch
(cd libscotch ;      make VERSION=5 RELEASE=1 PATCHLEVEL=10 scotch && make install)
rm -f *~ *.o lib*.so parser_yy.c parser_ly.h parser_ll.c *scotch.h *scotchf.h y.output dummysizes
make CC="gcc" CCD="gcc"	\
					scotch.h				\
					scotchf.h				\
					libscotch.so				\
					libscotcherr.so			\
					libscotcherrexit.so
gcc -O3 -DCOMMON_FILE_COMPRESS_GZ -DCOMMON_RANDOM_FIXED_SEED -DSCOTCH_RENAME -DSCOTCH_RENAME_PARSER -Drestrict=__restrict -DSCOTCH_VERSION=5 -DSCOTCH_RELEASE=1 -DSCOTCH_PATCHLEVEL=10 dummysizes.c -o dummysizes -lz -lm -lrt
ld: library not found for -lrt
collect2: ld returned 1 exit status
make[2]: *** [dummysizes] Error 1
make[1]: *** [scotch] Error 2
make: *** [scotch] Error 2
+ make realclean
(cd libscotch ;      make realclean)
rm -f *~ *.o lib*.so parser_yy.c parser_ly.h parser_ll.c *scotch.h *scotchf.h y.output dummysizes
(cd scotch ;         make realclean)
rm -f *~ *.o acpl amk_ccc amk_fft2 amk_grf amk_hy amk_m2 amk_p2 atst gbase gcv *ggath *gmap gmk_hy gmk_m2 gmk_m3 gmk_msh gmk_ub2 gmtst *gord gotst gout *gpart *gscat *gtst mcv mmk_m2 mmk_m3 mord mtst
(cd libscotchmetis ; make realclean)
rm -f *~ *.o lib*.so
rm -f ../bin/* ../include/* ../lib/*

    WARNING: required include file 'scotch.h' not found!

Am I doing something wrong? Is anyone else having trouble with the patches? Have suggestions how to fix these errors?

Thanks,

MD

[gschaider]

Originally Posted by mgdenno

I copied OpenFOAM-2.0.1 and ThirdParty-2.0.0 to the disk image as OpenFOAM-2.0.x and ThirdParty-2.0.x, respectively. OpenFOAM and ThirdParty were both downloaded from: http://sourceforge.net/projects/foam/files/foam/

I edited OpenFOAM-2.0.x/etc/bashrc so that WM_PROJECT_VERSION=2.0.x (in place of OpenFOAM-2.0.1).


I applied the following ThirdParty and OpenFOAM patches from this thread. In the ThirdParty-2.0.x and OpenFOAM-2.0.x directorys I applied the following patchs:

patch -p1 < ThirdParty-2.0.0-Mac.patch
patch -p1 < OpenFOAM-2.0.x-Mac_v4_FPE.patch

The ThirdParty patch applied with no issues, however I received the following errors when applying the OpenFOAM patch:

patching file src/parallel/decompose/ptscotchDecomp/Make/options
Hunk #1 FAILED at 8.
1 out of 1 hunk FAILED -- saving rejects to file src/parallel/decompose/ptscotchDecomp/Make/options.rej
patching file src/parallel/decompose/scotchDecomp/Make/options
Hunk #1 FAILED at 12.
1 out of 1 hunk FAILED -- saving rejects to file src/parallel/decompose/scotchDecomp/Make/options.rej

I'm afraid that the problem is that you're using the 2.0.1-sources. The patch is built against 2.0.x from a couple of weeks ago which is a bit further down the road. For 2.0.1 you'll have to use one of the older patches (but I'm not sure which). Or you get the git-version from OpenCFD (which is up to date) and apply the patch or you get the git version from https://github.com/bgschaid/OpenFOAM-2.0.x (which is slightly outdated) and change to the Mac-patch

[bambedil]

Good evening to everyone,

I´m trying to install OpenFOAM2.0.x on my mac with LION nearly a week but with no success.

Used a lot of webpages with tricks and tips but nothing is working right now. What have I done...

1. Got Xcode4.2 from AppStore

2. Installed gcc4.5.3 with macports. (sudo port install gcc45)

3. and Openmpi with macports (sudo port install openmpi +gcc45)

4. Changed my gcc compiler with:
(sudo port select gcc mp-gcc45)

When I check my gcc compiler with (gcc -v) this one pops up in my terminal:

maggy:OpenFOAM-2.0.x macflo$ gcc -v

Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/opt/local/libexec/gcc/x86_64-apple-darwin11/4.5.3/lto-wrapper
Target: x86_64-apple-darwin11
Configured with: ../gcc-4.5.3/configure --prefix=/opt/local --build=x86_64-apple-darwin11 --enable-languages=c,c++,objc,obj-c++,fortran,java --libdir=/opt/local/lib/gcc45 --includedir=/opt/local/include/gcc45 --infodir=/opt/local/share/info --mandir=/opt/local/share/man --datarootdir=/opt/local/share/gcc-4.5 --with-local-prefix=/opt/local --with-system-zlib --disable-nls --program-suffix=-mp-4.5 --with-gxx-include-dir=/opt/local/include/gcc45/c++/ --with-gmp=/opt/local --with-mpfr=/opt/local --with-mpc=/opt/local --enable-stage1-checking --disable-multilib --enable-fully-dynamic-string
Thread model: posix
gcc version 4.5.3 (GCC)
maggy:OpenFOAM-2.0.x macflo$

I hope that my gcc is set right now...

5. A .sparseimage with the name "OpenFOAM" was created. 2GB space.

6. Mounted this image with:

(hdiutil attached "$HOME/OpenFOAM/.sparseimage" -mountpoint "$HOME/OpenFOAM" >/dev/null)

and created a link with:
(ln -sf /Volumes/OpenFOAM)

7. Downloaded OpenFOAM2.0.x and ThirdParty2.0.0 from git, unpacked these files to /Volumes/OpenFOAM/

8. Download the patches from this side (thx Bernhard). "OpenFOAM.2.0.xMacPatches" for ThirdParty2.0.0 and "OpenFOAM-2.0.x-Mac_v4_FPE.patch.gz" for OpenFOAM2.0.x.

9. Patched OpenFOAM2.0.x and ThirdParty with:

(patch -p1 < OpenFOAM-2.0.x-Mac_v4_FPE.patch)

maggy:OpenFOAM-2.0.x macflo$ patch -p1 < OpenFOAM-2.0.x-Mac_v4_FPE.patch
patching file applications/solvers/combustion/chemFoam/Make/options
patching file applications/solvers/combustion/fireFoam/Make/options
patching file applications/solvers/compressible/rhoSimplecFoam/Make/options
patching file applications/solvers/incompressible/adjointShapeOptimizationFoam/Make/options
patching file applications/solvers/incompressible/channelFoam/Make/options
patching file applications/solvers/incompressible/pimpleFoam/pimpleDyMFoam/Make/options
patching file applications/solvers/incompressible/simpleFoam/MRFSimpleFoam/Make/options
patching file applications/solvers/incompressible/simpleFoam/SRFSimpleFoam/Make/options
patching file applications/solvers/incompressible/simpleFoam/windSimpleFoam/Make/options
patching file applications/solvers/lagrangian/icoUncoupledKinematicParcelDyMFoam/Make/options
patching file applications/solvers/lagrangian/icoUncoupledKinematicParcelFoam/Make/options
patching file applications/solvers/lagrangian/reactingParcelFilmFoam/Make/options
patching file applications/solvers/multiphase/compressibleInterFoam/Make/options
patching file applications/solvers/multiphase/compressibleInterFoam/compressibleInterDyMFoam/Make/options
patching file applications/solvers/multiphase/interFoam/LTSInterFoam/Make/options
patching file applications/solvers/multiphase/interFoam/MRFInterFoam/Make/options
patching file applications/solvers/multiphase/interFoam/Make/options
patching file applications/solvers/multiphase/interFoam/interDyMFoam/Make/options
patching file applications/solvers/multiphase/interFoam/porousInterFoam/Make/options
patching file applications/solvers/multiphase/interMixingFoam/Make/options
patching file applications/solvers/multiphase/interPhaseChangeFoam/Make/options
patching file applications/utilities/mesh/generation/blockMesh/Make/options
patching file applications/utilities/postProcessing/miscellaneous/execFlowFunctionObjects/Make/options
patching file applications/utilities/postProcessing/turbulence/R/Make/options
patching file applications/utilities/postProcessing/turbulence/createTurbulenceFields/Make/options
patching file applications/utilities/postProcessing/velocityField/Pe/Make/options
patching file applications/utilities/postProcessing/wall/wallHeatFlux/Make/options
patching file applications/utilities/postProcessing/wall/wallShearStress/Make/options
patching file applications/utilities/postProcessing/wall/yPlusLES/Make/options
patching file applications/utilities/postProcessing/wall/yPlusRAS/Make/options
patching file applications/utilities/preProcessing/applyBoundaryLayer/Make/options
patching file bin/addr2line4Mac.py
patching file etc/bashrc
patching file etc/config/settings.sh
patching file src/OSspecific/POSIX/POSIX.C
patching file src/OSspecific/POSIX/clockTime/clockTime.H
patching file src/OSspecific/POSIX/fileStat.C
patching file src/OSspecific/POSIX/printStack.C
patching file src/OSspecific/POSIX/signals/sigFpe.C
patching file src/OSspecific/POSIX/signals/sigFpe.H
patching file src/OpenFOAM/db/dynamicLibrary/dynamicCode/dynamicCode.C
patching file src/OpenFOAM/db/dynamicLibrary/dynamicCode/dynamicCode.H
patching file src/OpenFOAM/primitives/Scalar/doubleFloat.H
patching file src/conversion/ensight/part/ensightPart.C
patching file src/conversion/ensight/part/ensightPartIO.C
patching file src/dynamicMesh/fvMeshDistribute/fvMeshDistributeTemplates.C
patching file src/finiteVolume/fields/fvPatchFields/derived/codedFixedValue/codedFixedValueFvPatchField.C
patching file src/finiteVolume/fields/fvPatchFields/derived/codedFixedValue/codedFixedValueFvPatchField.H
Hunk #1 succeeded at 81 with fuzz 1 (offset -1 lines).
patching file src/parallel/decompose/ptscotchDecomp/Make/options
patching file src/parallel/decompose/scotchDecomp/Make/options
patching file wmake/Makefile
patching file wmake/rules/darwinIntel64Gcc/c
patching file wmake/rules/darwinIntel64Gcc/c++
patching file wmake/rules/darwinIntel64Gcc/c++Debug
patching file wmake/rules/darwinIntel64Gcc/c++Opt
patching file wmake/rules/darwinIntel64Gcc/c++Prof
patching file wmake/rules/darwinIntel64Gcc/cDebug
patching file wmake/rules/darwinIntel64Gcc/cOpt
patching file wmake/rules/darwinIntel64Gcc/cProf
patching file wmake/rules/darwinIntel64Gcc/general
patching file wmake/rules/darwinIntel64Gcc/mplib
patching file wmake/rules/darwinIntel64Gcc/mplibOPENMPI
patching file wmake/rules/darwinIntel64Gcc45/c
patching file wmake/rules/darwinIntel64Gcc45/c++
patching file wmake/rules/darwinIntel64Gcc45/c++Debug
patching file wmake/rules/darwinIntel64Gcc45/c++Opt
patching file wmake/rules/darwinIntel64Gcc45/c++Prof
patching file wmake/rules/darwinIntel64Gcc45/cDebug
patching file wmake/rules/darwinIntel64Gcc45/cOpt
patching file wmake/rules/darwinIntel64Gcc45/cProf
patching file wmake/rules/darwinIntel64Gcc45/general
patching file wmake/rules/darwinIntel64Gcc45/mplib
patching file wmake/rules/darwinIntel64Gcc45/mplibOPENMPI
maggy:OpenFOAM-2.0.x macflo$

I think everything is fine...

And also with the patch for ThirdParty was no error.

10. I´m not sure now what Bernhard with "- A file that goes to ~/OpenFOAM/site/2.0.x/ This tells OF that it should use the system-OpenMPI and gcc 4.5 from MacPorts (the Apple gcc 4.2 chockes on some SubField-stuff)"
means.

Does this folder creates his by himself? Do I have to generate the folder "site/2.0.x/" with the prefs.sh file by my own??? I´m not sure...

11. Finally added (. ~/OpenFOAM/OpenFOAM-2.0.x/etc/bashrc) to my .profile-file and started the console again.

12. OK, when I start ./Allwmake in /OpenFOAM/OpenFOAM2.0.x/ a got a lot of errors, something like that:

/opt/local/include/gcc45/c++/cwchar:67:11: error: '::mbstate_t' has not been declared
/opt/local/include/gcc45/c++/cwchar:141:11: error: '::wint_t' has not been declared
/opt/local/include/gcc45/c++/cwchar:143:11: error: '::btowc' has not been declared
/opt/local/include/gcc45/c++/cwchar:144:11: error: '::fgetwc' has not been declared
/opt/local/include/gcc45/c++/cwchar:145:11: error: '::fgetws' has not been declared
/opt/local/include/gcc45/c++/cwchar:146:11: error: '::fputwc' has not been declared
/opt/local/include/gcc45/c++/cwchar:147:11: error: '::fputws' has not been declared
/opt/local/include/gcc45/c++/cwchar:148:11: error: '::fwide' has not been declared
/opt/local/include/gcc45/c++/cwchar:149:11: error: '::fwprintf' has not been declared
/opt/local/include/gcc45/c++/cwchar:150:11: error: '::fwscanf' has not been declared



and that


/Users/macflo/OpenFOAM/OpenFOAM-2.0.x/src/OpenFOAM/lnInclude/HashTableI.H:445:8: error: 'Foam::HashTable<T, Key, Hash>::const_iterator' is not a type
/Users/macflo/OpenFOAM/OpenFOAM-2.0.x/src/OpenFOAM/lnInclude/HashTableI.H:447:11: error: 'iteratorEnd' does not name a type


at the end


/opt/local/include/gcc45/c++//x86_64-apple-darwin11/bits/gthr.h:170:27: error: expected declaration before end of line
make[2]: *** [Make/darwinIntel64Gcc45DPOpt/solidEquilibriumDisplacementFoam.o] Error 1
make[2]: Target `/Users/macflo/OpenFOAM/OpenFOAM-2.0.x/platforms/darwinIntel64Gcc45DPOpt/bin/solidEquilibriumDisplacementFoam' not remade because of errors.
make[1]: *** [solidEquilibriumDisplacementFoam] Error 2
make[1]: Target `application' not remade because of errors.
make: *** [stressAnalysis] Error 2
make: Target `application' not remade because of errors.


WHAT DID I WRONG. I have absolutely no idea what I have to do now.

I hope someone can help me by this...

Wish you an nice sunday anyway

bambedil

[mgdenno]

Hi Bernhard,

Thanks so much for your help and all the work you do on OF.

I didn't realize there was a git distribution...I did as you suggested and downloaded OpenFOAM-2.0.x from https://github.com/OpenFOAM/OpenFOAM-2.0.x. Then I applied your patch and it worked with no issues, however I am still having trouble compiling....I just realized that scotch is not compiling in ThirdParty. I haven't searched for solutions yet, but will post back if I can't figure it out.

Thanks again,

MD

[gschaider]

Originally Posted by bambedil

10. I´m not sure now what Bernhard with "- A file that goes to ~/OpenFOAM/site/2.0.x/ This tells OF that it should use the system-OpenMPI and gcc 4.5 from MacPorts (the Apple gcc 4.2 chockes on some SubField-stuff)"
means.

Does this folder creates his by himself? Do I have to generate the folder "site/2.0.x/" with the prefs.sh file by my own??? I´m not sure...

Yep. You'll have to create it

Originally Posted by bambedil

11. Finally added (. ~/OpenFOAM/OpenFOAM-2.0.x/etc/bashrc) to my .profile-file and started the console again.

12. OK, when I start ./Allwmake in /OpenFOAM/OpenFOAM2.0.x/ a got a lot of errors, something like that:

/opt/local/include/gcc45/c++/cwchar:67:11: error: '::mbstate_t' has not been declared
/opt/local/include/gcc45/c++/cwchar:141:11: error: '::wint_t' has not been declared
/opt/local/include/gcc45/c++/cwchar:143:11: error: '::btowc' has not been declared
/opt/local/include/gcc45/c++/cwchar:144:11: error: '::fgetwc' has not been declared
/opt/local/include/gcc45/c++/cwchar:145:11: error: '::fgetws' has not been declared
/opt/local/include/gcc45/c++/cwchar:146:11: error: '::fputwc' has not been declared
/opt/local/include/gcc45/c++/cwchar:147:11: error: '::fputws' has not been declared
/opt/local/include/gcc45/c++/cwchar:148:11: error: '::fwide' has not been declared
/opt/local/include/gcc45/c++/cwchar:149:11: error: '::fwprintf' has not been declared
/opt/local/include/gcc45/c++/cwchar:150:11: error: '::fwscanf' has not been declared

Havn't seen that one before. No idea. I blame Lion (mainly because I havn'T got it). All these definitions are found in /usr/include/wchar.h on my Snow Leopard-machine.

Maybe someone with a Lion-machine can help you here. Try
#include "wchar.h"
in the beginnining, but I wouldn't be too optimistic (BTW: check the start of the output. Maybe there is something you missed like 'can't include wchar.h')

Originally Posted by bambedil

/Users/macflo/OpenFOAM/OpenFOAM-2.0.x/src/OpenFOAM/lnInclude/HashTableI.H:445:8: error: 'Foam::HashTable<T, Key, Hash>::const_iterator' is not a type
/Users/macflo/OpenFOAM/OpenFOAM-2.0.x/src/OpenFOAM/lnInclude/HashTableI.H:447:11: error: 'iteratorEnd' does not name a type

I've seen that but I think the problem is that in that line 445 the macro forAllConstIter the first argument (the base type) has the statement ::const_iter appended which some compilers tolerate, others don't

Originally Posted by bambedil

/opt/local/include/gcc45/c++//x86_64-apple-darwin11/bits/gthr.h:170:27: error: expected declaration before end of line
make[2]: *** [Make/darwinIntel64Gcc45DPOpt/solidEquilibriumDisplacementFoam.o] Error 1
make[2]: Target `/Users/macflo/OpenFOAM/OpenFOAM-2.0.x/platforms/darwinIntel64Gcc45DPOpt/bin/solidEquilibriumDisplacementFoam' not remade because of errors.
make[1]: *** [solidEquilibriumDisplacementFoam] Error 2
make[1]: Target `application' not remade because of errors.
make: *** [stressAnalysis] Error 2
make: Target `application' not remade because of errors.

That one I have no idea

[bambedil]

Good Evening,

first, thank you Berhard for your quick reply.

The next few days I gonna start a new try to install open foam on lion. I will let you know how it works.

Greeting

Florian

[mgdenno]

Hello All,

Thank you Bernhard and Sushant for your help, I was finally able to get OF to compile on OS X 10.7 (Lion).

I think I was making 2 mistakes that were preventing it from working until now:

1. I was not using the OpenFOAM-2.0.x source that the patches were written for (Thank you Bernhard for pointing that out).
2. I was un-taring the source to my ~/Downloads directory and then moving them to my disk image. This was causing some files to be overwritten.

The only testing I did was to run the damBreak case (both parallel and not), which seems to work fine. However, I have two concerns:

1. There were lots of places where the compile.log says "could not open file xXXX.H for source file yYYY.C", however it doesn't cause any errors. Is this a problem?
2. paraFoam doesn't work (If I do paraFoam -builtin -touch, then open the case.foam file with ParaView.app it works OK though). Is there an easy fix for this?

Just out of curiosity, anyone ever try to install OSX on a case sensitive partition to avoid the need for a seperate disk image?

bambedil,

Looks like the only thing I did differently than you was not install openmpi from macports...not sure if that would cause your problems or not... Also my builds were failing with the same error as you (although I was not getting all the same ones as you). For me it was because scotch was not building in ThirdParty because I was un-taring the directory in ~/Downloads which was messing up the source.

MD

[gschaider]

Originally Posted by mgdenno

I was un-taring the source to my ~/Downloads directory and then moving them to my disk image. This was causing some files to be overwritten

... because Downloads is on a non-sensistive partition

Originally Posted by mgdenno

The only testing I did was to run the damBreak case (both parallel and not), which seems to work fine. However, I have two concerns:

1. There were lots of places where the compile.log says "could not open file xXXX.H for source file yYYY.C", however it doesn't cause any errors. Is this a problem?

That is during the generation of the dependencies, right? No. It's not a problem. I think you should only see this during the first compilation (because not all lnInclude-directories are in place then)

Originally Posted by mgdenno

paraFoam doesn't work (If I do paraFoam -builtin -touch, then open the case.foam file with ParaView.app it works OK though). Is there an easy fix for this?

Not from my side. To compile the paraFoam-plugin you need a self-compiled paraview-version and I havn't bothered to do that in a long time (the native reader is good enough for me, it also seems faster to me)

Originally Posted by mgdenno

Just out of curiosity, anyone ever try to install OSX on a case sensitive partition to avoid the need for a seperate disk image?

I did that before I had a separate partition. It works but everything that involves disc-access (compiling, startup ...) is much slower. Plus you'll have to make sure that the image-file is not backed up by time-machine (left as an exercise to the reader to figure out why)

[bambedil]

Good evening everyone,

in my first post I described my installation process step by step. One thing, which I did wrong was to untar the files in my "Download"-directory. But it didn´t make it better. Still I get error-messages!

Here are the first lines of the message:

./Allwmake
make: Nothing to be done for `all'.
no ThirdParty sources found - skipping
+ wmakePrintBuild -check
no git description found
+ /bin/rm -f 'OpenFOAM/Make/*/global.?'
+ wmakeLnInclude OpenFOAM
+ wmakeLnInclude OSspecific/POSIX
+ Pstream/Allwmake
+ wmake libso dummy
...

Anyway how do you guys handle the ThirdParty directory? What are you doing with this??? Did you install scotch-libraries by your own? I did it with macports, now I´m not sure if these library are installed right now

Relating to Gschaiders answer. (/opt/local/include/gcc45/c++/cwchar:67:11: error: '::mbstate_t' has not been declared) I looked in my cwchar-file. it looks like this:


/** @file include/cwchar
* This is a Standard C++ Library file. You should @c \#include this file
* in your programs, rather than any of the @a *.h implementation files.
*
* This is the C++ version of the Standard C Library header @c wchar.h,
* and its contents are (mostly) the same as that header, but are all
* contained in the namespace @c std (except for names which are defined
* as macros in C).
*/

//
// ISO C++ 14882: 21.4
//

#pragma GCC system_header

#include <bits/c++config.h>
#include <cstddef>

#if _GLIBCXX_HAVE_WCHAR_H
#include <wchar.h>
#endif

#ifndef _GLIBCXX_CWCHAR
#define _GLIBCXX_CWCHAR 1

// Need to do a bit of trickery here with mbstate_t as char_traits
// assumes it is in wchar.h, regardless of wchar_t specializations.
#ifndef _GLIBCXX_HAVE_MBSTATE_T
extern "C"
{
typedef struct
{
int __fill[6];
} mbstate_t;
}
#endif

_GLIBCXX_BEGIN_NAMESPACE(std)

using ::mbstate_t;

_GLIBCXX_END_NAMESPACE

// Get rid of those macros defined in <wchar.h> in lieu of real functions.
#undef btowc
#undef fgetwc
#undef fgetws
#undef fputwc
#undef fputws
#undef fwide
#undef fwprintf
#undef fwscanf
#undef getwc
#undef getwchar
#undef mbrlen
#undef mbrtowc
#undef mbsinit
#undef mbsrtowcs
#undef putwc
#undef putwchar
#undef swprintf
#undef swscanf
#undef ungetwc
#undef vfwprintf
#if _GLIBCXX_HAVE_VFWSCANF
# undef vfwscanf
#endif
#undef vswprintf
#if _GLIBCXX_HAVE_VSWSCANF
# undef vswscanf
#endif
#undef vwprintf
#if _GLIBCXX_HAVE_VWSCANF
# undef vwscanf
#endif
#undef wcrtomb
#undef wcscat
#undef wcschr
#undef wcscmp
#undef wcscoll
#undef wcscpy
#undef wcscspn
#undef wcsftime
#undef wcslen
#undef wcsncat
#undef wcsncmp
#undef wcsncpy
#undef wcspbrk
#undef wcsrchr
#undef wcsrtombs
#undef wcsspn
#undef wcsstr
#undef wcstod
#if _GLIBCXX_HAVE_WCSTOF
# undef wcstof
#endif
#undef wcstok
#undef wcstol
#undef wcstoul
#undef wcsxfrm
#undef wctob
#undef wmemchr
#undef wmemcmp
#undef wmemcpy
#undef wmemmove
#undef wmemset
#undef wprintf
#undef wscanf

#if _GLIBCXX_USE_WCHAR_T

_GLIBCXX_BEGIN_NAMESPACE(std)

using ::wint_t;

using ::btowc;
using ::fgetwc;
using ::fgetws;
using ::fputwc;
using ::fputws;
using ::fwide;
using ::fwprintf;
using ::fwscanf;
using ::getwc;
using ::getwchar;
using ::mbrlen;
using ::mbrtowc;
using ::mbsinit;
using ::mbsrtowcs;
using :utwc;
using :utwchar;
#ifndef _GLIBCXX_HAVE_BROKEN_VSWPRINTF
using ::swprintf;
#endif
using ::swscanf;
using ::ungetwc;
using ::vfwprintf;
#if _GLIBCXX_HAVE_VFWSCANF
using ::vfwscanf;
#endif
#ifndef _GLIBCXX_HAVE_BROKEN_VSWPRINTF
using ::vswprintf;
#endif
#if _GLIBCXX_HAVE_VSWSCANF
using ::vswscanf;
#endif
using ::vwprintf;
#if _GLIBCXX_HAVE_VWSCANF
using ::vwscanf;
#endif
using ::wcrtomb;
using ::wcscat;
using ::wcscmp;
using ::wcscoll;
using ::wcscpy;
using ::wcscspn;
using ::wcsftime;
using ::wcslen;
using ::wcsncat;
using ::wcsncmp;
using ::wcsncpy;
using ::wcsrtombs;
using ::wcsspn;
using ::wcstod;
#if _GLIBCXX_HAVE_WCSTOF
using ::wcstof;
#endif
using ::wcstok;
using ::wcstol;
using ::wcstoul;
using ::wcsxfrm;
using ::wctob;
using ::wmemcmp;
using ::wmemcpy;
using ::wmemmove;
using ::wmemset;
using ::wprintf;
using ::wscanf;
using ::wcschr;
using ::wcspbrk;
using ::wcsrchr;
using ::wcsstr;
using ::wmemchr;

#ifndef __CORRECT_ISO_CPP_WCHAR_H_PROTO
inline wchar_t*
wcschr(wchar_t* __p, wchar_t __c)
{ return wcschr(const_cast<const wchar_t*>(__p), __c); }

inline wchar_t*
wcspbrk(wchar_t* __s1, const wchar_t* __s2)
{ return wcspbrk(const_cast<const wchar_t*>(__s1), __s2); }

inline wchar_t*
wcsrchr(wchar_t* __p, wchar_t __c)
{ return wcsrchr(const_cast<const wchar_t*>(__p), __c); }

inline wchar_t*
wcsstr(wchar_t* __s1, const wchar_t* __s2)
{ return wcsstr(const_cast<const wchar_t*>(__s1), __s2); }

inline wchar_t*
wmemchr(wchar_t* __p, wchar_t __c, size_t __n)
{ return wmemchr(const_cast<const wchar_t*>(__p), __c, __n); }
#endif

_GLIBCXX_END_NAMESPACE

#if _GLIBCXX_USE_C99

#undef wcstold
#undef wcstoll
#undef wcstoull

_GLIBCXX_BEGIN_NAMESPACE(__gnu_cxx)

#if _GLIBCXX_USE_C99_CHECK || _GLIBCXX_USE_C99_DYNAMIC
extern "C" long double
(wcstold)(const wchar_t * restrict, wchar_t ** restrict) throw ();
#endif
#if !_GLIBCXX_USE_C99_DYNAMIC
using ::wcstold;
#endif
#if _GLIBCXX_USE_C99_LONG_LONG_CHECK || _GLIBCXX_USE_C99_LONG_LONG_DYNAMIC
extern "C" long long int
(wcstoll)(const wchar_t * restrict, wchar_t ** restrict, int) throw ();
extern "C" unsigned long long int
(wcstoull)(const wchar_t * restrict, wchar_t ** restrict, int) throw ();
#endif
#if !_GLIBCXX_USE_C99_LONG_LONG_DYNAMIC
using ::wcstoll;
using ::wcstoull;
#endif

_GLIBCXX_END_NAMESPACE

_GLIBCXX_BEGIN_NAMESPACE(std)

using ::__gnu_cxx::wcstold;
using ::__gnu_cxx::wcstoll;
using ::__gnu_cxx::wcstoull;

_GLIBCXX_END_NAMESPACE

#endif

#endif //_GLIBCXX_USE_WCHAR_T

#ifdef __GXX_EXPERIMENTAL_CXX0X__
# if defined(_GLIBCXX_INCLUDE_AS_TR1)
# error C++0x header cannot be included from TR1 header
# endif
# if defined(_GLIBCXX_INCLUDE_AS_CXX0X)
# include <tr1_impl/cwchar>
# else
# define _GLIBCXX_INCLUDE_AS_CXX0X
# define _GLIBCXX_BEGIN_NAMESPACE_TR1
# define _GLIBCXX_END_NAMESPACE_TR1
# define _GLIBCXX_TR1
# include <tr1_impl/cwchar>
# undef _GLIBCXX_TR1
# undef _GLIBCXX_END_NAMESPACE_TR1
# undef _GLIBCXX_BEGIN_NAMESPACE_TR1
# undef _GLIBCXX_INCLUDE_AS_CXX0X
# endif
#endif

#endif


Is there something different to your cwchar-file?

Wish you all a nice weekend and hopefully I get OF2 running


Florian

[mgdenno]

Florian,

Right away, it looks like it can't find your ThirdParty directory. What is it named? It should have the same version number as your OpenFOAM directory. Since you are using ThirdParty-2.0.0 and OpenFOAM-2.0.x you need to rename ThirdParty-2.0.0 to ThirdParty-2.0.x.

I installed scotch from ThirdParty.

Hope that helps.

MD

[bambedil]

HI MD,

I renamed my ThirdParty-folder to 2.0.x. Now it works. Fine, the output is now:


========================================
Start ThirdParty Allwmake
========================================

========================================
Build MPI libraries if required

========================================
Build Scotch decomposition library scotch_5.1.11
/Users/macflo/OpenFOAM/ThirdParty-2.0.x/platforms/darwinIntel64Gcc45/scotch_5.1.11
scotch header in /Users/macflo/OpenFOAM/ThirdParty-2.0.x/platforms/darwinIntel64Gcc45/scotch_5.1.11/include
scotch libs in /Users/macflo/OpenFOAM/ThirdParty-2.0.x/platforms/darwinIntel64Gcc45DPOpt/lib

========================================
Build PTScotch decomposition library scotch_5.1.11 (uses MPI)
/Users/macflo/OpenFOAM/ThirdParty-2.0.x/platforms/darwinIntel64Gcc45/scotch_5.1.11

ptscotch header in /Users/macflo/OpenFOAM/ThirdParty-2.0.x/platforms/darwinIntel64Gcc45/scotch_5.1.11/include/openmpi-system
ptscotch libs in /Users/macflo/OpenFOAM/ThirdParty-2.0.x/platforms/darwinIntel64Gcc45DPOpt/lib/openmpi-system

========================================
Build malloc

optional component was not found
========================================
Build Tecio
optional component was not found

========================================
Done ThirdParty Allwmake
========================================

I think this problem is fixed...

THX MD

after this my terminal says:

+ wmakePrintBuild -check
no git description found
+ /bin/rm -f OpenFOAM/Make/darwinIntel64Gcc45DPOpt/global.C
+ wmakeLnInclude OpenFOAM

What exactly is the meaning of: "no git description found"


Anyway my "cwchar"-problem is still there. Any idea whats going on with my gcc-complier?

Thx in advanced

Florian

[gschaider]

Originally Posted by bambedil

What exactly is the meaning of: "no git description found"

Never mind that

Originally Posted by bambedil

Anyway my "cwchar"-problem is still there. Any idea whats going on with my gcc-complier?

No. Have you tried compiling a simple "Hello world"-example with it? If THAT doesn't work then your installation has a problem

[bambedil]

Hallo,

I did a small research about this cwchar-poblem. It seems to be that some libraries are missing on my mac. It could be that this has something to do with gnu c libraries and specially with the glibc. But if I want to compile this glibc-library on lion the terminal say:

../configure
checking build system type... x86_64-apple-darwin11.2.0
checking host system type... x86_64-apple-darwin11.2.0
checking for gcc... gcc
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
configure: running configure fragment for add-on libidn
configure: running configure fragment for add-on nptl
*** The GNU C library is currently not available for this platform.
*** So far nobody cared to port it and if there is no volunteer it
*** might never happen. So, if you have interest to see glibc on
*** this platform visit
*** http://www.gnu.org/software/libc/porting.html
*** and join the group of porters

I´m usind gcc4.5.3.

I don´t find gnu c library for mac...

Greetings