[idosil]

I just installed OpenFOAM and tried to run a few of the attached cases. When I executed the nozzleFlow2D for this solver I got the following error in the log file:

/*---------------------------------------------------------------------------*\
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 1.4 |
| \ / A nd | Web: http://www.openfoam.org |
| \/ M anipulation | |
\*---------------------------------------------------------------------------*/

Exec : lesInterFoam . nozzleFlow2D
Date : Jul 10 2007
Time : 10:55:44
Host : CentOS
PID : 9054
Root : /home/ido/OpenFOAM/ido-1.4/run/tutorials/lesInterFoam
Case : nozzleFlow2D
Nprocs : 1
Create time

Create mesh for time = 0


Reading environmentalProperties
Reading field pd

Reading field gamma

Reading field U

Reading/calculating face flux field phi

Reading transportProperties

Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Calculating field g.h

#0 Foam::error::printStack(Foam:stream&)
#1 Foam::sigFpe::sigFpeHandler(int)
#2 Uninterpreted: [0xd96420]
#3 Foam::polyMesh::calcDirections() const
#4 Foam::polyMesh::directions() const
#5 Foam::cubeRootVolDelta::calcDelta()
#6 Foam::cubeRootVolDelta::cubeRootVolDelta(Foam::wor d const&, Foam::fvMesh const&, Foam::dictionary const&)
#7 Foam::LESdelta::adddictionaryConstructorToTable<fo am::cuberootvoldelta>::New(Foa m::word const&, Foam::fvMesh const&, Foam::dictionary const&)
#8 Foam::LESdelta::New(Foam::word const&, Foam::fvMesh const&, Foam::dictionary const&)
#9 Foam::smoothDelta::smoothDelta(Foam::word const&, Foam::fvMesh const&, Foam::dictionary const&)
#10 Foam::LESdelta::adddictionaryConstructorToTable<fo am::smoothdelta>::New(Foam::wo rd const&, Foam::fvMesh const&, Foam::dictionary const&)
#11 Foam::LESdelta::New(Foam::word const&, Foam::fvMesh const&, Foam::dictionary const&)
#12 Foam::LESmodel::LESmodel(Foam::word const&, Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::transportModel&)
#13 Foam::LESmodels::oneEqEddy::oneEqEddy(Foam::Geomet ricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::transportModel&)
#14 Foam::LESmodel::adddictionaryConstructorToTable<fo am::lesmodels::oneeqeddy>::New (Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::transportModel&)
#15 Foam::LESmodel::New(Foam::GeometricField<foam::vec tor<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double,> const&, Foam::transportModel&)
#16 main
#17 __libc_start_main
#18 __gxx_personality_v0 at /usr/src/packages/BUILD/glibc-2.3/csu/../sysdeps/i386/elf/start.S:122


can any one explain? help?

Thanks, Ido