CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Installation

[OpenFOAM.com] installation break down,jump out this!i really dont know how to deal with it

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 15, 2020, 12:11
Unhappy installation break down,jump out this!i really dont know how to deal with it
  #1
New Member
 
wangh
Join Date: Jul 2020
Posts: 10
Rep Power: 6
heheda is on a distinguished road
-lfiniteVolume -lOpenFOAM -ldl -lm -o /home/lc/OpenFOAM/OpenFOAM-2.3.1/platforms/linux64GccDPOpt/bin/solidEquilibriumDisplacementFoam
/usr/bin/ld: cannot find -lfiniteVolume
/usr/bin/ld: cannot find -lOpenFOAM
collect2: error: ld returned 1 exit status
/home/lc/OpenFOAM/OpenFOAM-2.3.1/wmake/Makefile:149: recipe for target '/home/lc/OpenFOAM/OpenFOAM-2.3.1/platforms/linux64GccDPOpt/bin/solidEquilibriumDisplacementFoam' failed
make[2]: *** [/home/lc/OpenFOAM/OpenFOAM-2.3.1/platforms/linux64GccDPOpt/bin/solidEquilibriumDisplacementFoam] Error 1
make[2]: leaving directory“/home/lc/OpenFOAM/OpenFOAM-2.3.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam”
/home/lc/OpenFOAM/OpenFOAM-2.3.1/wmake/MakefileApps:39: recipe for target 'solidEquilibriumDisplacementFoam' failed
make[1]: *** [solidEquilibriumDisplacementFoam] Error 2
make[1]: Target 'application'not remade because of errors .
make[1]: leaving directory '/home/lc/OpenFOAM/OpenFOAM-2.3.1/applications/solvers/stressAnalysis'
/home/lc/OpenFOAM/OpenFOAM-2.3.1/wmake/MakefileApps:39: recipe for target 'stressAnalysis' failed
make: *** [stressAnalysis] Error 2
make: Target 'application'not remade because of errors .
heheda is offline   Reply With Quote

Reply

Tags
error, installation, openfoam


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[DesignModeler] DesignModeler Scripting: How to get Full Command Access ANT ANSYS Meshing & Geometry 53 February 16, 2020 16:13
[foam-extend.org] A smooth installation of foam-3.0-extend on OpenSUSE 13.1 64-bits cookcaptain OpenFOAM Installation 7 May 26, 2015 12:22
Pilch and CA Erdman droplet break up in fluent air_fun FLUENT 0 June 25, 2014 16:33
64bitrhel5 OF installation instructions mirko OpenFOAM Installation 2 August 12, 2008 19:07
Free surface boudary conditions with SOLA-VOF Fan Main CFD Forum 10 September 9, 2006 13:24


All times are GMT -4. The time now is 09:18.