[wamars]

Hello to everyone,
I’m trying to install OpenFOAM 6 on Centos 7.8
I’m following the instruction in
https://openfoamwiki.net/index.php/I...7.5_.281804.29
However I get an error when executing the point 7, using the command:


source $HOME/OpenFOAM/OpenFOAM-6/etc/bashrc WM_LABEL_SIZE=64 WM_MPLIB=OPENMPI FOAMY_HEX_MESH=yes


bash: _foamSource: Befehl nicht gefunden...
bash: _foamEval: Befehl nicht gefunden...
bash: _foamSource: Befehl nicht gefunden...
bash: _foamSource: Befehl nicht gefunden...
bash: _foamSource: Befehl nicht gefunden...
bash: _foamSource: Befehl nicht gefunden...
bash: _foamSource: Befehl nicht gefunden...
bash: _foamSource: Befehl nicht gefunden...




i think i should change something in the bashrc file in the $HOME/OpenFOAM/OpenFOAM-6/etc/
Code:

#----------------------------------*sh-*--------------------------------------
# =========                 |
# \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
#  \\    /   O peration     | Website:  https://openfoam.org
#   \\  /    A nd           | Copyright (C) 2011-2018 OpenFOAM Foundation
#    \\/     M anipulation  |
#------------------------------------------------------------------------------
# License
#     This file is part of OpenFOAM.
#
#     OpenFOAM is free software: you can redistribute it and/or modify it
#     under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
#
#     OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
#     ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
#     FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
#     for more details.
#
#     You should have received a copy of the GNU General Public License
#     along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
#
# File
#     etc/bashrc
#
# Description
#     Startup file for OpenFOAM
#     Sourced from ~/.profile or ~/.bashrc
#     Should be usable by any POSIX-compliant shell (eg, ksh)
#
#------------------------------------------------------------------------------

export WM_PROJECT=OpenFOAM
export WM_PROJECT_VERSION=6

################################################################################
# USER EDITABLE PART: Changes made here may be lost with the next upgrade
#
# FOAM_INST_DIR is the location of the OpenFOAM installation which defaults to
# the directory containing this file if sourced by a bash shell.
#
# Please set to the appropriate path if the default is not correct.
#
#[ "$BASH" -o "$ZSH_NAME" ] && \
#export FOAM_INST_DIR=$(cd $(dirname ${BASH_SOURCE:-$0})/../.. && pwd -P) || \
export FOAM_INST_DIR=$HOME/$WM_PROJECT
# export FOAM_INST_DIR=~$WM_PROJECT
# export FOAM_INST_DIR=/opt/$WM_PROJECT
# export FOAM_INST_DIR=/usr/local/$WM_PROJECT
#
# END OF (NORMAL) USER EDITABLE PART
################################################################################

# The default environment variables below can be overridden in a prefs.sh file
# located in ~/.OpenFOAM/$WM_PROJECT_VERSION, ~/.OpenFOAM,
# $FOAM_INST_DIR/site/$WM_PROJECT_VERSION or $FOAM_INST_DIR/site

#- Compiler location:
#    WM_COMPILER_TYPE= system | ThirdParty (OpenFOAM)
export WM_COMPILER_TYPE=system

#- Compiler:
#    WM_COMPILER = Gcc | Gcc48 ... Gcc62 | Clang | Icc
export WM_COMPILER=Gcc
unset WM_COMPILER_ARCH WM_COMPILER_LIB_ARCH

#- Memory addressing:
#    On a 64bit OS this can be 32bit or 64bit
#    On a 32bit OS addressing is 32bit and this option is not used
#    WM_ARCH_OPTION = 32 | 64
export WM_ARCH_OPTION=64

#- Precision:
#    WM_PRECISION_OPTION = SP | DP | LP
export WM_PRECISION_OPTION=DP

#- Label size:
#    WM_LABEL_SIZE = 32 | 64
export WM_LABEL_SIZE=32

#- Optimised, debug, profiling:
#    WM_COMPILE_OPTION = Opt | Debug | Prof
export WM_COMPILE_OPTION=Opt

#- MPI implementation:
#    WM_MPLIB = SYSTEMOPENMPI | OPENMPI | SYSTEMMPI | MPICH | MPICH-GM | HPMPI
#               | MPI | FJMPI | QSMPI | SGIMPI | INTELMPI
export WM_MPLIB=SYSTEMOPENMPI

#- Operating System:
#    WM_OSTYPE = POSIX | ???
export WM_OSTYPE=POSIX

#- Floating-point signal handling:
#    set or unset
export FOAM_SIGFPE=

#- memory initialisation:
#    set or unset
#export FOAM_SETNAN=


################################################################################

# The old dirs to be cleaned from the environment variables
foamOldDirs="$WM_PROJECT_DIR $WM_THIRD_PARTY_DIR \
    $HOME/$WM_PROJECT/$USER $FOAM_USER_APPBIN $FOAM_USER_LIBBIN \
    $WM_PROJECT_SITE $FOAM_SITE_APPBIN $FOAM_SITE_LIBBIN"

# Location of installation
# ~~~~~~~~~~~~~~~~~~~~~~~~
export WM_PROJECT_INST_DIR=$FOAM_INST_DIR
export WM_PROJECT_DIR=$WM_PROJECT_INST_DIR/$WM_PROJECT-$WM_PROJECT_VERSION

# Location of third-party software
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
export WM_THIRD_PARTY_DIR=$WM_PROJECT_INST_DIR/ThirdParty-$WM_PROJECT_VERSION

# Location of site-specific templates etc
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# unset is equivalent to $WM_PROJECT_INST_DIR/site
if [ -d "$WM_PROJECT_SITE" ]
then
    export WM_PROJECT_SITE
else
    unset WM_PROJECT_SITE
fi

# Location of user files
# ~~~~~~~~~~~~~~~~~~~~~~
export WM_PROJECT_USER_DIR=$HOME/$WM_PROJECT/$USER-$WM_PROJECT_VERSION

# Source initialization functions
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
. $WM_PROJECT_DIR/etc/config.sh/functions

# Add in preset user or site preferences:
_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile prefs.sh`

# Evaluate command-line parameters and record settings for later
# these can be used to set/unset values, or specify alternative pref files
export FOAM_SETTINGS="$@"
_foamEval $@

# Clean standard environment variables (PATH, LD_LIBRARY_PATH, MANPATH)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
foamClean=$WM_PROJECT_DIR/bin/foamCleanPath

#- Clean PATH
cleaned=`$foamClean "$PATH" "$foamOldDirs"` && PATH="$cleaned"

#- Clean LD_LIBRARY_PATH
cleaned=`$foamClean "$LD_LIBRARY_PATH" "$foamOldDirs"` \
    && LD_LIBRARY_PATH="$cleaned"

#- Clean MANPATH
cleaned=`$foamClean "$MANPATH" "$foamOldDirs"` && MANPATH="$cleaned"

export PATH LD_LIBRARY_PATH MANPATH


# Source project setup files
# ~~~~~~~~~~~~~~~~~~~~~~~~~~
_foamSource $WM_PROJECT_DIR/etc/config.sh/settings
_foamSource $WM_PROJECT_DIR/etc/config.sh/aliases


# Source user setup files for optional packages
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config.sh/mpi`
_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config.sh/paraview`
_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config.sh/ensight`
_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config.sh/gperftools`

if [ ! -z "$FOAMY_HEX_MESH" ]
then
    _foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config.sh/CGAL`
fi


# Clean environment paths again. Only remove duplicates
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#- Clean PATH
cleaned=`$foamClean "$PATH"` && PATH="$cleaned"

#- Clean LD_LIBRARY_PATH
cleaned=`$foamClean "$LD_LIBRARY_PATH"` && LD_LIBRARY_PATH="$cleaned"

#- Clean MANPATH (trailing ':' to find system pages)
cleaned=`$foamClean "$MANPATH"`: && MANPATH="$cleaned"

export PATH LD_LIBRARY_PATH MANPATH

#- Clean LD_PRELOAD
if [ -n "$LD_PRELOAD" ]
then
    cleaned=`$foamClean "$LD_PRELOAD"` && LD_PRELOAD="$cleaned"
    export LD_PRELOAD
fi


# Cleanup environment:
# ~~~~~~~~~~~~~~~~~~~~
unset cleaned foamClean foamOldDirs


# Unload initialization functions:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
. $WM_PROJECT_DIR/etc/config.sh/functions

# Source the bash completion file:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[ "$BASH" ] && . $WM_PROJECT_DIR/etc/config.sh/bash_completion

#------------------------------------------------------------------------------

Thanks.