[OpenFOAM.com] openfoam v1812 in cloud?

Kondorfa · October 14, 2019, 16:58

Hi Foamers,
AWS is providing OpenFOAM in their cloud

, but only the OpenFOAM Foundation distribution (versions up to 7) and not the ESI distribution (version 1906 or version 1812)

.

Does any on know a cloud service providing the OpenFAOM version 1812?

Thanks

gboig · October 16, 2019, 14:24

Hello Kondorfa
not sure if this helps but, we at Zurich University of Applied Sciences have been using kaleidosim.com to run our openfoam cases in the cloud, directly from our browser for the past 6 months - and we have actually placed a request with them to make v1812 available just a few days ago - according to them it should be available next week. - So it might be worth getting in contact with them, as in our experience they've been rather forthcoming and welcome feedback. Also: a second request for v1812 might speed things up even more

Kind regards gboig

dybuk · October 17, 2019, 03:00

There is a OpenFoam+ on RESCALE platform

https://www.rescale.com/software/

Gompute · November 6, 2020, 05:42

You have it installed in Gompute, as well as other OpenFOAM and FOAM-Ext versions. As you have remote viz included, you can do the pre-post directly in the cloud. You can have a free trial by filling this form: https://www.gompute.com/contact-us/

October 14, 2019, 16:58	openfoam v1812 in cloud?	#1
Kondorfa New Member Join Date: Feb 2019 Posts: 15 Rep Power: 7	Hi Foamers, AWS is providing OpenFOAM in their cloud , but only the OpenFOAM Foundation distribution (versions up to 7) and not the ESI distribution (version 1906 or version 1812). Does any on know a cloud service providing the OpenFAOM version 1812? Thanks

October 16, 2019, 14:24	v1812 on Kaleidosim	#2
gboig New Member Gernot Boiger Join Date: Oct 2019 Posts: 1 Rep Power: 0	Hello Kondorfa not sure if this helps but, we at Zurich University of Applied Sciences have been using kaleidosim.com to run our openfoam cases in the cloud, directly from our browser for the past 6 months - and we have actually placed a request with them to make v1812 available just a few days ago - according to them it should be available next week. - So it might be worth getting in contact with them, as in our experience they've been rather forthcoming and welcome feedback. Also: a second request for v1812 might speed things up even more Kind regards gboig

November 6, 2020, 05:42	OpenFOAM in the cloud	#4
Gompute New Member Iago Fernandez Join Date: Nov 2020 Posts: 5 Rep Power: 6	You have it installed in Gompute, as well as other OpenFOAM and FOAM-Ext versions. As you have remote viz included, you can do the pre-post directly in the cloud. You can have a free trial by filling this form: https://www.gompute.com/contact-us/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frequently Asked Questions about Installing OpenFOAM	wyldckat	OpenFOAM Installation	3	November 14, 2023 12:58
Problems with custom code on OpenFOAM v1812 in Fedora 30	joaran	OpenFOAM Programming & Development	3	May 13, 2019 10:29
openFoam Hangout on Air #2 - Cloud	julien.decharentenay	OpenFOAM Announcements from Other Sources	3	February 2, 2014 06:16
Cross-compiling OpenFOAM 1.7.0 on Linux for Windows 32 and 64bits with Mingw-w64	wyldckat	OpenFOAM Announcements from Other Sources	3	September 8, 2010 07:25
Modified OpenFOAM Forum Structure and New Mailing-List	pete	Site News & Announcements	0	June 29, 2009 06:56

October 17, 2019, 03:00		#3
dybuk Member W.T Join Date: Oct 2012 Posts: 35 Rep Power: 14	There is a OpenFoam+ on RESCALE platform https://www.rescale.com/software/