CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Installation

Compilation error for OpenFOAM-ext on Ubantu 10.04 32 bit

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 17, 2012, 16:08
Default Compilation error for OpenFOAM-ext on Ubantu 10.04 32 bit
  #1
Member
 
Sangeeta
Join Date: Jul 2012
Location: Kingston, Canada
Posts: 70
Rep Power: 14
Sargam05 is on a distinguished road
Hello everybody,

I have installed OpenFOAM-1.6-ext and also changed environmental variables in my ubantu 10.04 32 bit machine. During compilation, it seems src files are compiling successfully but some errors messages are coming for solvers compilation.

Since it is a big file of compilation therefore I cannot copy all compilation error messages. There is an example error message for pisoFoam and porousSimpleFoam solvers:

/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
SOURCE=regionProperties/regionProperties.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -Ifluid -Isolid -IregionProperties -Iinclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/thermophysicalModels/basic/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/compressible/turbulenceModel -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/regionProperties.o
SOURCE=derivedFvPatchFields/solidWallHeatFluxTemperature/solidWallHeatFluxTemperatureFvPatchScalarField.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -Ifluid -Isolid -IregionProperties -Iinclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/thermophysicalModels/basic/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/compressible/turbulenceModel -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/solidWallHeatFluxTemperatureFvPatchScalarField.o
SOURCE=derivedFvPatchFields/solidWallMixedTemperatureCoupled/solidWallMixedTemperatureCoupledFvPatchScalarField .C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -Ifluid -Isolid -IregionProperties -Iinclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/thermophysicalModels/basic/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/compressible/turbulenceModel -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/solidWallMixedTemperatureCoupledFvPatchScalarField .o
SOURCE=fluid/compressibleCourantNo.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -Ifluid -Isolid -IregionProperties -Iinclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/thermophysicalModels/basic/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/compressible/turbulenceModel -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/compressibleCourantNo.o
g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/turbulenceModel -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/transportModels -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed -Xlinker --no-as-needed Make/linuxGccDPOpt/pisoFoam.o -L/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/lib/linuxGccDPOpt \
-lincompressibleTurbulenceModel -lincompressibleRASModels -lincompressibleLESModels -lincompressibleTransportModels -lfiniteVolume -lmeshTools -llduSolvers -lOpenFOAM -ldl -lm -o /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linuxGccDPOpt/pisoFoam
/usr/bin/ld: cannot find -lincompressibleTurbulenceModel
collect2: ld returned 1 exit status
make[2]: *** [/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linuxGccDPOpt/pisoFoam] Error 1
make[1]: *** [pisoFoam] Error 2
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
SOURCE=porousSimpleFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -I../simpleFoam -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/RAS/RASModel -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/transportModels -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/porousSimpleFoam.o
SOURCE=solid/solidRegionDiffNo.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -Ifluid -Isolid -IregionProperties -Iinclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/thermophysicalModels/basic/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/compressible/turbulenceModel -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/solidRegionDiffNo.o
/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readSIMPLEControls.H: In function ‘int main(int, char**)’:
/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readSIMPLEControls.H:6: warning: unused variable ‘momentumPredictor’
/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readSIMPLEControls.H:9: warning: unused variable ‘fluxGradp’
/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readSIMPLEControls.H:12: warning: unused variable ‘transonic’
SOURCE=chtMultiRegionFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -Ifluid -Isolid -IregionProperties -Iinclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/thermophysicalModels/basic/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/compressible/turbulenceModel -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/chtMultiRegionFoam.o
fluid/setRegionFluidFields.H: In function ‘int main(int, char**)’:
fluid/setRegionFluidFields.H:1: warning: unused variable ‘mesh’
fluid/setRegionFluidFields.H:5: warning: unused variable ‘K’
fluid/setRegionFluidFields.H:6: warning: unused variable ‘U’
fluid/setRegionFluidFields.H:7: warning: unused variable ‘phi’
fluid/setRegionFluidFields.H:8: warning: unused variable ‘g’
fluid/setRegionFluidFields.H:10: warning: unused variable ‘turb’
fluid/setRegionFluidFields.H:11: warning: unused variable ‘DpDt’
fluid/setRegionFluidFields.H:14: warning: unused variable ‘psi’
fluid/setRegionFluidFields.H:15: warning: unused variable ‘h’
g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -I../simpleFoam -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/RAS/RASModel -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/transportModels -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/meshTools/lnInclude -IlnInclude -I. -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed -Xlinker --no-as-needed Make/linuxGccDPOpt/porousSimpleFoam.o -L/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/lib/linuxGccDPOpt \
-lincompressibleRASModels -lincompressibleTransportModels -lfiniteVolume -lmeshTools -llduSolvers -lOpenFOAM -ldl -lm -o /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linuxGccDPOpt/porousSimpleFoam
/usr/bin/ld: cannot find -lincompressibleRASModels
collect2: ld returned 1 exit status
make[2]: *** [/home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linuxGccDPOpt/porousSimpleFoam] Error 1
make[1]: *** [porousSimpleFoam] Error 2
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found


Similar error messages are coming for all solvers.
Does anyone have any idea why these errors are coming?

Thanks in advance.

Regards,
Sangeeta
Sargam05 is offline   Reply With Quote

Old   September 17, 2012, 17:07
Default
  #2
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,982
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Greetings Sangeeta,

it won't matter the lengthy build log, because this message says it all:
Code:
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
Run the following commands:
Code:
cd $WM_PROJECT_DIR
cd wmake/src
make
What errors did these commands output?

I can almost bet you didn't install all of the vital packages listed in the guide. Try running the following command:
Code:
sudo apt-get install git flex bison rpm g++ zlib1g-dev binutils-dev openmpi-bin libopenmpi-dev libxext-dev libxt-dev libxrender-dev libstdc++5 libgl1-mesa-dev libglu1-mesa-dev
For more on this lengthy command, you can see this post: http://www.cfd-online.com/Forums/ope...tml#post382035 post #25

Best regards,
Bruno
__________________
wyldckat is offline   Reply With Quote

Old   September 17, 2012, 17:28
Default
  #3
Member
 
Sangeeta
Join Date: Jul 2012
Location: Kingston, Canada
Posts: 70
Rep Power: 14
Sargam05 is on a distinguished road
Quote:
Originally Posted by wyldckat View Post
Greetings Sangeeta,

it won't matter the lengthy build log, because this message says it all:
Code:
/bin/sh: /home/sangeeta/OpenFOAM/OpenFOAM-1.6-ext/wmake/bin/linuxGcc/wmkdep: not found
Run the following commands:
Code:
cd $WM_PROJECT_DIR
cd wmake/src
make
What errors did these commands output?

I can almost bet you didn't install all of the vital packages listed in the guide. Try running the following command:
Code:
sudo apt-get install git flex bison rpm g++ zlib1g-dev binutils-dev openmpi-bin libopenmpi-dev libxext-dev libxt-dev libxrender-dev libstdc++5 libgl1-mesa-dev libglu1-mesa-dev
For more on this lengthy command, you can see this post: http://www.cfd-online.com/Forums/ope...tml#post382035 post #25

Best regards,
Bruno

Hi Bruno,

Thanks for the quick reply. I have run following commands
$WM_PROJECT_DIR
cd wmake/src
make

Output messages after running these commands:

sangeeta@sangeeta-laptop:~/OpenFOAM$ cd OpenFOAM-1.6-ext/
sangeeta@sangeeta-laptop:~/OpenFOAM/OpenFOAM-1.6-ext$ cd wmake/src
sangeeta@sangeeta-laptop:~/OpenFOAM/OpenFOAM-1.6-ext/wmake/src$ ls
dirToString.c Makefile wmkdep.l
sangeeta@sangeeta-laptop:~/OpenFOAM/OpenFOAM-1.6-ext/wmake/src$ make
Makefile:55: /rules/linuxGcc/general: No such file or directory
Makefile:56: /rules/linuxGcc: No such file or directory
make: *** No rule to make target `/rules/linuxGcc'. Stop.

I also installed vital packages as follows:
sangeeta@sangeeta-laptop:~$ sudo apt-get install git flex bison rpm g++ zlib1g-dev binutils-dev openmpi-bin libopenmpi-dev libxext-dev libxt-dev libxrender-dev libstdc++5 libgl1-mesa-dev libglu1-mesa-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package git is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package git has no installation candidate


Does that mean it already installed in my machine?
In OpenFOAM-1.6-ext/wmake/rules there are some directories (e.g. darwinIntel64, linuxIA64l164 etc.). Does it is related to 64 bit machine? Can I install OpenFOAM-1.6-ext for ubantu 32 bit?

Could you please also suggest me installation and compiling process of OpenFOAM-1.6-ext on Ubantu 10.04 32 bit machine?

Thanks in advance.

Regards,
Sangeeta
Sargam05 is offline   Reply With Quote

Old   September 17, 2012, 17:31
Default
  #4
Member
 
Sangeeta
Join Date: Jul 2012
Location: Kingston, Canada
Posts: 70
Rep Power: 14
Sargam05 is on a distinguished road
Hi Bruno,

One more thing I like to mention is I have OpenFOAM171 installed in my machine. Do you think that could be the reason for compilation errors?

Thanks,
Sangeeta
Sargam05 is offline   Reply With Quote

Old   September 17, 2012, 17:33
Default
  #5
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,982
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Hi Sangeeta,

Sorry, I thought you were using 12.04 32 bit.

For 10.04 32 bit, follow these instructions: http://openfoam-extend.git.sourcefor...4.3_32-bit.txt

Best regards,
Bruno
__________________
wyldckat is offline   Reply With Quote

Old   September 17, 2012, 17:39
Default
  #6
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,982
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
For having more than one OpenFOAM version/variant installed:
  1. Edit the file "~/.bashrc".
  2. Find the lines you have that reference OpenFOAM.
    For example, if you have these two lines:
    Code:
    . $HOME/OpenFOAM/OpenFOAM-1.7.1/etc/bashrc
    . $HOME/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
    Change them to these two:
    Code:
    alias of171='. $HOME/OpenFOAM/OpenFOAM-1.7.1/etc/bashrc' 
    alias of16ext='. $HOME/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc'
    Or:
    Code:
    alias of171='source $HOME/OpenFOAM/OpenFOAM-1.7.1/etc/bashrc' 
    alias of16ext='source $HOME/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc'
  3. Start a new terminal.
  4. On each new terminal, run only one per terminal, for the respective aliases. For example, if on one terminal you want to have OpenFOAM 1.7.1, then run:
    Code:
    of171
    As for 1.6-ext on another terminal:
    Code:
    of16ext
__________________
wyldckat is offline   Reply With Quote

Old   September 18, 2012, 00:46
Default
  #7
Member
 
Sangeeta
Join Date: Jul 2012
Location: Kingston, Canada
Posts: 70
Rep Power: 14
Sargam05 is on a distinguished road
Hi Bruno,

Thank you for the valuable informations. I am following instructions as given in http://openfoam-extend.git.sourcefor...4.3_32-bit.txt.
I have not found packages in given websites for the installation of libstdc++.os.5 .
e.g. when I am using
http://packages.debian.org/lenny/i38...dc++5/download

It is showing "two or more packages specified (libstdc++5 lenny)"
Could you please suggest me from where and which packages I can install for the installation of libstdc++.os.5 .

Thanks in advance.

Regards,
Sangeeta
Sargam05 is offline   Reply With Quote

Old   September 18, 2012, 17:12
Default
  #8
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,982
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Hi Sangeeta,

I think you can safely skip those particular instructions for installing "libstdc++.so.5".

You might have problems installing ParaView 3.12.0, but I haven't managed to have enough time to debug that issue. Therefore, after running AllMake int the "ThirdParty" folder, you can move on to build OpenFOAM 1.6-ext, at least until I or someone else can figure out what's wrong.


edit: Apparently there was no problem. It has built OpenFOAM 1.6-ext and ParaView 3.12.0 without any problems on the virtual machine I have with Ubuntu 10.04 32bit. The real issue was unrelated to anything else but some virtualization quirks...
Therefore, the instructions about "libstdc++.so.5" are probably outdated now! You can safely skip them.


Best regards,
Bruno
__________________

Last edited by wyldckat; September 18, 2012 at 18:43. Reason: see "edit:"
wyldckat is offline   Reply With Quote

Old   September 19, 2012, 17:25
Default
  #9
Member
 
Sangeeta
Join Date: Jul 2012
Location: Kingston, Canada
Posts: 70
Rep Power: 14
Sargam05 is on a distinguished road
Hi Bruno,

Thank you for the reply. I have successfully installed and compiled OpenFOAM-1.6-ext in my machine.

Thanks a lot for the guidance.

Best regards,
Sangeeta
Sargam05 is offline   Reply With Quote

Old   September 22, 2012, 16:53
Default Hi..please help me
  #10
Senior Member
 
Sasan Ghomi
Join Date: Sep 2012
Location: Denmark
Posts: 292
Rep Power: 15
sasanghomi is on a distinguished road
Hi every body
I have some errors in compilation of OP-ext 1.6 on ubuntu 12.04 LTS.
Can you help me? please help me.....
sasan.
log.Allwmake.tar.gz
sasanghomi is offline   Reply With Quote

Old   September 22, 2012, 17:21
Default
  #11
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,982
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Greetings Sasan,

You didn't need to post your question in two different threads and then ask me twice via private message

Anyway, I've moved one of your posts to this thread (because this one is dedicated to 12.04 and is more recent) and I then deleted the repeated question.
Inadvertently it seems that I deleted the post where your attachment was located... fortunately, you sent me the PM, so here is the extract you shared with me:
Code:
/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude   -I/home/sasan/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude     -fPIC -Xlinker --add-needed -Xlinker --no-as-needed   Make/linux64Gcc46DPOpt/writePointSet.o   Make/linux64Gcc46DPOpt/writeFuns.o Make/linux64Gcc46DPOpt/writePatch.o   Make/linux64Gcc46DPOpt/setSet.o   -L/home/sasan/OpenFOAM/OpenFOAM-1.6-ext/lib/linux64Gcc46DPOpt \
         -lmeshTools     -lreadline -lncurses -lOpenFOAM -liberty -ldl     -lm -o   /home/sasan/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/setSet
-- Loading ParaView CMake commands
-- Loading ParaView CMake commands - done
/usr/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
make[3]: *** [/home/sasan/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/setSet] Error 1
make[2]: *** [setSet] Error 2
make[3]: `/home/sasan/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/setsToZones' is up to date.
make[3]: `/home/sasan/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/splitMesh' is up to date.
-- Configuring done
make[3]: `/home/sasan/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/splitMeshRegions' is up to date.
-- Generating done
-- Build files have been written to:   /home/sasan/OpenFOAM/OpenFOAM-1.6-ext/applications/utilities/postProcessing/graphics/PV3FoamReader/PV3FoamReader/Make/linux64Gcc46DPOpt
+ '[' '' == darwin ']'
+ make
[ 41%] Built target PV3FoamReader
make[3]: `/home/sasan/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/stitchMesh' is up to date.
[100%] Built target PV3FoamReader_SM
+ [ -d  -a -r  ]
The solution is simple - install the missing packages:
Code:
sudo apt-get install libreadline-dev libncurses-dev
Best regards,
Bruno

edit: ooops, this thread is actually for Ubuntu 10.04...
__________________

Last edited by wyldckat; October 20, 2012 at 09:48. Reason: see "edit:"
wyldckat is offline   Reply With Quote

Old   September 22, 2012, 18:42
Default thanks
  #12
Senior Member
 
Sasan Ghomi
Join Date: Sep 2012
Location: Denmark
Posts: 292
Rep Power: 15
sasanghomi is on a distinguished road
thank you wyldckat
I am so sorry...I am a primary user...
I really appreciate your help..
sasanghomi is offline   Reply With Quote

Old   March 20, 2014, 00:59
Post
  #13
Senior Member
 
Join Date: Sep 2013
Location: Bangalore India
Posts: 134
Rep Power: 13
sam.ho is on a distinguished road
Quote:
I also installed vital packages as follows:
sangeeta@sangeeta-laptop:~$ sudo apt-get install git flex bison rpm g++ zlib1g-dev binutils-dev openmpi-bin libopenmpi-dev libxext-dev libxt-dev libxrender-dev libstdc++5 libgl1-mesa-dev libglu1-mesa-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package git is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package git has no installation candidate


Does that mean it already installed in my machine?
In OpenFOAM-1.6-ext/wmake/rules there are some directories (e.g. darwinIntel64, linuxIA64l164 etc.). Does it is related to 64 bit machine? Can I install OpenFOAM-1.6-ext for ubantu 32 bit?

Could you please also suggest me installation and compiling process of OpenFOAM-1.6-ext on Ubantu 10.04 32 bit machine?

Thanks in advance.

Regards,
Sangeeta
I am also facing the same problem but my system is 64 bit Linux Ubuntu 12.04 .
Can anybody help me to resolve this issue ?
sam.ho is offline   Reply With Quote

Old   March 22, 2014, 06:21
Default
  #14
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,982
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Greetings sam.ho,

Are you referring to this error message:
Code:
E: Package git has no installation candidate
I don't understand... wasn't this problem already solved in another thread?

Can you provide more details?

Best regards,
Bruno
__________________
wyldckat is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFOAM 1.6 ext - Compilation errors - Fedora 17(32bit) toolpost OpenFOAM Installation 15 September 21, 2012 10:38
errors during compilation and installation of OpenFOAM-1.7.x on Ubuntu 10.04 ftec OpenFOAM Installation 7 February 23, 2011 07:07
compilation of fluentMeshToFoam on 64 bit Suse lilli OpenFOAM 0 July 20, 2009 07:20


All times are GMT -4. The time now is 23:53.