[mmkr825]

Hi everyone,
I am fresher to openFoam. I came to know the uses of swak4Foam utility for writing boundary conditions. In my application also i need to apply zero flux boundary condition. So i wish to install swak4Foam. Now i am working on OF 2.1.1 version.
I followed every step as mentioned in the tutorials but i am not able to get it. The error message as follows

Error message:-

malli_reddy@ubuntu:~/OpenFOAM/malli_reddy-2.1.1$ svn checkout https://openfoam-extend.svn.sourcefo...ies/swak4Foam/

svn: OPTIONS of 'https://openfoam-extend.svn.sourcefo...ries/swak4Foam': Could not resolve hostname `openfoam-extend.svn.sourceforge.net': No address associated with hostname (https://openfoam-extend.svn.sourceforge.net)



Could you please suggest me how to overcome this problem. And suggest me some good tutorial for the swak4Foam.

Thanks
Regards


Mallikarjuna

[treima]

Hello,

you can have a look at this side:
https://github.com/wyldckat/swak4foam

If it isn´t working with svn, you can download the repository as a zip-archive. There is a long README, where you can find several informations and links about swak4foam, too.

I think, there aren´t very much tutorials about swak4foam, but there are others, who can give you more information about this. You can find some examples in the OpenFOAM wiki, depending on your application of swak4foam, i.e. groovyBC:
http://openfoamwiki.net/index.php/Contrib_groovyBC

regards

treima

[mmkr825]

hi treima,
Thanks for quick reply. I did the same procedure as you suggested. I downloaded swak4Foam zip-archive, and i compiled it with wmake all. I have doubt whether it is installed correctly or not. Please guide me how to test it's functionality.

Thanks
Regards
Mallikarjuna

[treima]

I don´t know, if there is a short procedure or a command, like foamInstallationTest for OpenFOAM, to test the Installation of swak4foam. But you can take one of the tutorials and change a boundary condtion and calculate one with groovyBC. In this case you get some practice, too


regards

treima

[mmkr825]

hi treima,
Thank you very much for your quick reply. I will go through your suggestion.
I have one more doubt about groovyBC. Is it works for OF 2.1.1 also. I studied in some tutorials that it is only applicable for older versions like OF 1.6,etc.
Could you please clarify my doubt.
Thanks
Regards
Mallikarjuna

[treima]

I haven´t installt version 2.1.1 on my computer, but I´m working with version 2.1.0 and 1.6-ext. GroovyBC works fine for both versions (for my cases). So it might be the same with version 2.1.1.
Sometimes the tutorials are written for older versions and no one has ever updated the tutorial description

[mmkr825]

hi sir,
Thanks for quick reply. When i recompiled with wmake all in the swak4Foam library i gotthe following message.

malli_reddy@ubuntu:~/OpenFOAM/malli_reddy-2.1.1/swak4Foam$ wmake all
No 'swakConfiguration'. Python etc won't work
Checking swak4Foam-version and generating file
./Allwmake: 9: [[: not found
./Allwmake: 17: [[: not found
Bison is version 2.4.1
./Allwmake: 33: cannot open 2.3: No such file
./Allwmake: 33: [[: not found
OpenFOAM-version: Major 2 Minor 1 Patch 1
./Allwmake: 67: [[: not found
No change to swak4FoamParsers/foamVersion4swak.H
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libswak4FoamParsers.so' is up to date.
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libgroovyBC.so' is up to date.
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libswakFunctionObjects.so' is up to date.
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libsimpleFunctionObjects.so' is up to date.
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libsimpleSwakFunctionObjects.so' is up to date.
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libswakTopoSources.so' is up to date.
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libswakSourceFields.so' is up to date.
'/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/libgroovyStandardBCs.so' is up to date.
SWAK_PYTHON_INCLUDE not defined .... no Python-Integration
make[1]: Entering directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/funkyDoCalc'
make[1]: `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/bin/funkyDoCalc' is up to date.
make[1]: Leaving directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/funkyDoCalc'
make[1]: Entering directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/funkySetBoundaryField'
make[1]: `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/bin/funkySetBoundaryField' is up to date.
make[1]: Leaving directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/funkySetBoundaryField'
make[1]: Entering directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/funkySetFields'
make[1]: `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/bin/funkySetFields' is up to date.
make[1]: Leaving directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/funkySetFields'
make[1]: Entering directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/replayTransientBC'
make[1]: `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/bin/replayTransientBC' is up to date.
make[1]: Leaving directory `/home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/swak4Foam/Utilities/replayTransientBC'


I want to know it is installed correctly or not.

Thanks
Regards
Mallikarjuna

[treima]

It seems, that you don´t have python on your machine, so perhaps some parts wouldn´t work.
But as you can see, the compiled parts are all up to date. You should be able to use them without any problems. That includes groovyBC, funkySetFields and so on, you can see them on your list.

[mmkr825]

Hi sir,
Thank you very much for spending time on my problem. I have checked in the /home/malli_reddy/OpenFOAM/malli_reddy-2.1.1/platforms/linuxGccDPOpt/lib/ , it consisting of the following files.
libgroovyBC.so libswak4FoamParsers.so
libgroovyStandardBCs.so libswakFunctionObjects.so
libsimpleFunctionObjects.so libswakSourceFields.so
libsimpleSwakFunctionObjects.so libswakTopoSources.so


I will check according to your suggestion. Again thank you so much. I can't forget your help in my project.

Thanks
Regards
Mallikarjuna

[aujamal20]

Dear

Did u run the allwmake directly or make some changes in any file. I am doing in the same way but it is not working .....

Thanks

[mmkr825]

Originally Posted by aujamal20

Dear

Did u run the allwmake directly or make some changes in any file. I am doing in the same way but it is not working .....

Thanks

Hi,

In your swak4Foam/Libraries/Allwmake, Change the first line to

#! /bin/bash

Then run with wmake all every thing will be o.k.

Thanks
Regards
Mallikarjuna.r