OpenFOAM 1.6 - settlingFoam tutorials

alberto · August 11, 2009, 10:30

Both tutorials for settlingFoam do not work properly and crashes due to increasing Courant number after a few iterations.

Best,
Alberto

henry · August 12, 2009, 18:53

Thanks for the bug-report, these tutorials are now fixed in 1.6.x.

H

alberto · August 13, 2009, 02:58

Thanks!

Best,

sachin · November 4, 2009, 02:29

Hello,
I saw code for settlingFoam in 1.5.x and 1.6. The rho terms in pEqn.h and UEqn.h have been changed from snGrad(rho) to interpolate(rho) with + and - signs are also changed. I was curious to know why this change was opted

Thanks in advance,

Sachin Kanetkar

ChemE1989 · February 17, 2012, 14:02

Hello,

I am brand new to OpenFoam and I just wanted to know how to run the tank3D case. Can anyone provide a basic step by step guide of how to generate the mesh, solve and view in parafoam?

Thanks in advance

mmkr825 · September 13, 2012, 04:02

Hi everyone,
I am fresher to openFoam. I came to know the uses of swak4Foam utility for writing boundary conditions. In my application also i need to apply zero flux boundary condition. So i wish to install swak4Foam. Now i am working on OF 2.1.1 version.
I followed every step as mentioned in the tutorials but i am not able to get it. The error message as follows

Error message:-

malli_reddy@ubuntu:~/OpenFOAM/malli_reddy-2.1.1$ svn checkout https://openfoam-extend.svn.sourcefo...ies/swak4Foam/

svn: OPTIONS of 'https://openfoam-extend.svn.sourcefo...ries/swak4Foam': Could not resolve hostname `openfoam-extend.svn.sourceforge.net': No address associated with hostname (https://openfoam-extend.svn.sourceforge.net)

Could you please suggest me how to overcome this problem. And suggest me some good tutorial for the swak4Foam.

Thanks
Regards

August 11, 2009, 10:30	OpenFOAM 1.6 - settlingFoam tutorials	#1
alberto Senior Member Alberto Passalacqua Join Date: Mar 2009 Location: Ames, Iowa, United States Posts: 1,912 Rep Power: 36	Both tutorials for settlingFoam do not work properly and crashes due to increasing Courant number after a few iterations. Best, Alberto __________________ Alberto Passalacqua GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541) OpenQBMM - An open-source implementation of quadrature-based moment methods. To obtain more accurate answers, please specify the version of OpenFOAM you are using.

August 13, 2009, 02:58		#3
alberto Senior Member Alberto Passalacqua Join Date: Mar 2009 Location: Ames, Iowa, United States Posts: 1,912 Rep Power: 36	Thanks! Best, __________________ Alberto Passalacqua GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541) OpenQBMM - An open-source implementation of quadrature-based moment methods. To obtain more accurate answers, please specify the version of OpenFOAM you are using.

February 17, 2012, 14:02	How to Run Tank3D	#5
ChemE1989 New Member Join Date: Jul 2011 Posts: 8 Rep Power: 15	Hello, I am brand new to OpenFoam and I just wanted to know how to run the tank3D case. Can anyone provide a basic step by step guide of how to generate the mesh, solve and view in parafoam? Thanks in advance

September 13, 2012, 04:02	About installation of swak4Foam	#6
mmkr825 Member M Mallikarjuna Reddy Join Date: Jul 2012 Posts: 91 Rep Power: 14	Hi everyone, I am fresher to openFoam. I came to know the uses of swak4Foam utility for writing boundary conditions. In my application also i need to apply zero flux boundary condition. So i wish to install swak4Foam. Now i am working on OF 2.1.1 version. I followed every step as mentioned in the tutorials but i am not able to get it. The error message as follows Error message:- malli_reddy@ubuntu:~/OpenFOAM/malli_reddy-2.1.1$ svn checkout https://openfoam-extend.svn.sourcefo...ies/swak4Foam/ svn: OPTIONS of 'https://openfoam-extend.svn.sourcefo...ries/swak4Foam': Could not resolve hostname `openfoam-extend.svn.sourceforge.net': No address associated with hostname (https://openfoam-extend.svn.sourceforge.net) Could you please suggest me how to overcome this problem. And suggest me some good tutorial for the swak4Foam. Thanks Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFoam 1.6 Permissions in Ubuntu 9.04	AlanR	OpenFOAM Installation	14	December 28, 2009 20:45
OpenFOAM 1.6 package - CentOS 5.3 x86_64	linnemann	OpenFOAM Installation	36	September 2, 2009 13:46
OpenFOAM Version 1.6 Released	opencfd	OpenFOAM Announcements from ESI-OpenCFD	0	July 27, 2009 18:55
Modified OpenFOAM Forum Structure and New Mailing-List	pete	Site News & Announcements	0	June 29, 2009 06:56
64bitrhel5 OF installation instructions	mirko	OpenFOAM Installation	2	August 12, 2008 19:07

August 12, 2009, 18:53		#2
henry Senior Member Join Date: Mar 2009 Posts: 854 Rep Power: 22	Thanks for the bug-report, these tutorials are now fixed in 1.6.x. H

November 4, 2009, 02:29		#4
sachin Member Sachin Kanetkar Join Date: Mar 2009 Posts: 57 Rep Power: 17	Hello, I saw code for settlingFoam in 1.5.x and 1.6. The rho terms in pEqn.h and UEqn.h have been changed from snGrad(rho) to interpolate(rho) with + and - signs are also changed. I was curious to know why this change was opted Thanks in advance, Sachin Kanetkar