|
[Sponsors] |
February 10, 2014, 16:47 |
Reporting bugs for FOAM-Extend and 1.6-ext
|
#1 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128 |
If you have found bugs in the following variants/forks of OpenFOAM:
https://sourceforge.net/p/foam-extend/tickets/ The old bug tracker still has older issues... please don't use it for new reports: http://sourceforge.net/p/openfoam-ex...extendrelease/ If you need to report bugs regarding some of the other Extend related toolkits (e.g. swak4Foam, PyFoam, etc...), have a look at the main bug tracker page: http://sourceforge.net/p/openfoam-extend/_list/tickets And as a reminder:
Last edited by wyldckat; July 21, 2019 at 22:10. |
|
July 19, 2019, 05:38 |
|
#2 |
Senior Member
Hannes Kröger
Join Date: Mar 2009
Location: Rostock, Germany
Posts: 124
Rep Power: 18 |
Hi wyldckat,
are the links above still up-to-date? I have seen that besides https://sourceforge.net/p/openfoam-e...extendrelease/ there is another issue list active at https://sourceforge.net/p/foam-extend/tickets/ Which one should be preferred? Regards, Hannes
__________________
silentdynamics GmbH - http://silentdynamics.de open source CAE software solutions & support |
|
July 21, 2019, 22:16 |
|
#3 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,981
Blog Entries: 45
Rep Power: 128 |
Quick answer: Many thanks for the question! I completely forgot to update this thread for years now... I've updated it now.
Please use the issue tracker for foam-extend: https://sourceforge.net/p/foam-extend/tickets/ Although you might want to contact the group at FSB to get some quicker feedback on the bug reports: https://foam-extend.fsb.hr/ |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFOAM 1.6 ext | fportela | OpenFOAM Installation | 11 | December 26, 2013 19:55 |
Floating Point Exception - wrong boundaries or general PC problem? – OF 1.6 extend - | A.Wendy | OpenFOAM | 0 | February 27, 2013 05:50 |
parallel computing with GGI (OF 1.6 extend) | A.Wendy | OpenFOAM Running, Solving & CFD | 1 | November 18, 2012 18:27 |
[mesh manipulation] difference in 'make axial mesh' for OF 2.1 & OF 1.6 EXT | Rocky4 | OpenFOAM Meshing & Mesh Conversion | 0 | November 17, 2012 17:48 |
Solver Compiling error - OF 1.6 ext. | raditz | OpenFOAM Programming & Development | 8 | November 4, 2012 10:53 |