Home > Forums > Special Topics > Mesh Generation & Pre-Processing

errors with snappyhexmesh

Updated Threads

Reply

Search this Thread

June 30, 2024, 10:09	errors with snappyhexmesh	#1
Batmav New Member Join Date: Jun 2024 Posts: 2 Rep Power: 0	Hello all, I am trying to create a flow domain using snappyhexmesh but get the following error in Paraview when trying to visualize the mesh: Generic Warning: In vtkPolyhedron.cxx, line 1766 A cell with a non-manifold triangulation has been encountered. This cell cannot be contoured. Generic Warning: In vtkPolyhedron.cxx, line 1766 A cell with a non-manifold triangulation has been encountered. This cell cannot be contoured. I will also attach an image to show holes in the mesh. How can I resolve and eliminate this issue. https://drive.google.com/file/d/13Wc...usp=drive_link

Reply

Tags

openfaom, snappy hex mesh

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
courant number increases to rather large values	6863523	OpenFOAM Running, Solving & CFD	22	July 6, 2023 00:48
How to write k and epsilon before the abnormal end	xiuying	OpenFOAM Running, Solving & CFD	8	August 27, 2013 16:33
same geometry,structured and unstructured mesh,different behaviour.	sharonyue	OpenFOAM Running, Solving & CFD	13	January 2, 2013 23:40
IcoFoam parallel woes	msrinath80	OpenFOAM Running, Solving & CFD	9	July 22, 2007 03:58
Could anybody help me see this error and give help	liugx212	OpenFOAM Running, Solving & CFD	3	January 4, 2006 19:07

All times are GMT -4. The time now is 08:21.