Home > Forums > Special Topics > Mesh Generation & Pre-Processing

GMSH producing lines through mesh

Updated Threads

Reply

Search this Thread

January 8, 2017, 21:58	GMSH producing lines through mesh	#1
APCoding New Member Peter Join Date: Sep 2016 Posts: 13 Rep Power: 10	Hi all, I'm having this problem where Gmsh is creating a few lines across my mesh. My original Gmsh file (attached) looks fine, but when I exported to SU2 it got messed up (also attached). What could be causing this? I can attach anything else that could help. I'm viewing the CFD results is Paraview. Thanks! Both images are here: http://imgur.com/a/iywO1

January 23, 2017, 11:46		#2
APCoding New Member Peter Join Date: Sep 2016 Posts: 13 Rep Power: 10	Still haven't solved this issue. Any ideas?

Reply

Tags

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 08:38
[Gmsh] background mesh in gmsh	Nick_J	OpenFOAM Meshing & Mesh Conversion	1	March 20, 2013 05:20
[ICEM] Problem making structural mesh on a surface	froztbear	ANSYS Meshing & Geometry	1	November 10, 2011 09:52
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 20:43
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55

All times are GMT -4. The time now is 05:25.