wear rate simulation of a blade shotblasting

cecep · December 2, 2010, 01:48

Hello….

I am someone who being unfamiliar with the CFD software, so I would like to ask you who has the capability in using this software.

My question is : “ Can abbrasive or wear rate of a blade in shot blasting machine be simulated by using this CFD software ?”

As an information, this machine is used in foundry industry to remove the sand from the casting surface by using very high velocity steels shot which are thrown by the rotating blades onto the castings. The steels shot and the blades are in contact during the process causing wear on the surface of the blades.

Other question is : “ can steels shot be classified as fluid ?“

That are all my questions, I hope that somebody in this forum could answer to those questions and help me in solving the problems.

Thank’s

CCTech_Pune · December 2, 2010, 03:28

Erosion estimation can be simulated using commercial CFD softwares. Steel shots can be considered as solid particles with specified properties and using Lagrangian multiphase approach, erosion can be estimated.

December 2, 2010, 01:48	wear rate simulation of a blade shotblasting	#1
cecep New Member cecep Join Date: Dec 2010 Posts: 1 Rep Power: 0	Hello…. I am someone who being unfamiliar with the CFD software, so I would like to ask you who has the capability in using this software. My question is : “ Can abbrasive or wear rate of a blade in shot blasting machine be simulated by using this CFD software ?” As an information, this machine is used in foundry industry to remove the sand from the casting surface by using very high velocity steels shot which are thrown by the rotating blades onto the castings. The steels shot and the blades are in contact during the process causing wear on the surface of the blades. Other question is : “ can steels shot be classified as fluid ?“ That are all my questions, I hope that somebody in this forum could answer to those questions and help me in solving the problems. Thank’s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
flow rate decrement	d.h.	Main CFD Forum	3	August 6, 2008 06:18
helicopter rotor blade simulation	Cesare Ghermandi	CFX	1	June 8, 2004 20:27
TASCflow simulation result problem?	Mason	CFX	0	February 22, 2004 08:54
Fire simulation using FDS from NIST	Jens	Main CFD Forum	1	January 22, 2004 02:53
3-D Contaminant Dispersal Simulation	Apple L S Chan	Main CFD Forum	1	December 23, 1998 11:06

December 2, 2010, 03:28		#2
CCTech_Pune New Member CCTech Join Date: Jul 2010 Posts: 20 Rep Power: 16	Erosion estimation can be simulated using commercial CFD softwares. Steel shots can be considered as solid particles with specified properties and using Lagrangian multiphase approach, erosion can be estimated.