solid-liquid discontinuity contour -- CFD Online Discussion Forums

March 10, 2010, 04:57	solid-liquid discontinuity contour	#1
tantular New Member Tantular Nurtono Join Date: Mar 2010 Posts: 8 Rep Power: 16	Dear Fluent users, I have simulated the solid-liquid suspension in agitated tank, after the iterations converged and display the contour of volume fraction of solid. There is a discontinuity profile at interface between the stationary and moving zone. It looks not match between concentration in stationary and moving zone at the interface. I used MRF model, the diameter of solid particles is 0.9 mm, the solid volume fraction is 2%, and the liquid is water. Could any body give suggestion. Regards, Tantular

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GAMBIT] help( solid and liquid mixing)	sanaz	ANSYS Meshing & Geometry	6	October 15, 2009 11:25
solid liquid phase change (melting/solidification)	ernane	CFX	0	February 3, 2009 15:24
Shacking CAN VOF HEAT LIQUID SOLID	Optixxx	FLUENT	0	July 30, 2005 12:42
solid suspension in moving liquid	Jason	FLUENT	4	October 27, 2003 19:59
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19

All times are GMT -4. The time now is 17:42.