Home > Forums > General Forums > Main CFD Forum

Difficulties modeling temperature stratification

Updated Threads

Reply

Search this Thread

March 2, 2004, 13:20	Difficulties modeling temperature stratification	#1
Pease Guest Posts: n/a	Hello, I am modeling a reservoir with a stratified temperature with the k-epsilon model, but I am running into some problems. My initial temperature gradient disappears within 10 iterations, and the flow vectors point vertically upward at all wall boundaries. Any ideas what could be causing this to happen? Please help me! Thanks for your input! RP

March 3, 2004, 13:34	Re: Difficulties modeling temperature stratificati	#2
jk Guest Posts: n/a	Are you using the segregated solver? If so, try using the coupled explicit solver.

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calculation of the Governing Equations	Mihail	CFX	7	September 7, 2014 07:27
Different temperature to air and to solid , cfx, city modeling	kordou	CFX	1	January 19, 2011 20:20
Internal field temperature decreases after each iteration (Combustion Modeling)	germinal	OpenFOAM Running, Solving & CFD	1	November 29, 2010 14:16
evaporation modeling - have problem with temperature field	MOhaj	Main CFD Forum	0	April 25, 2010 01:21
problem with temperature field in modeling evaporation with fluent	MOhaj	FLUENT	0	April 25, 2010 00:54

All times are GMT -4. The time now is 22:06.