need reference for structured mesh generation

November 12, 2003, 01:59

Hi....I'm currently a GridGen user. I'm now working on the Structured mesh.

Can anyone suggest some good reference books/ papers/ articles for generation of structured mesh? Have you come across any good literature review for the mesh generation?

I'm an engineer and so I hope you can recommend those without too much mathematical details but will give me enough background in understanding the basics of grid generation.

I do have a few books which give me lots of formulae but without any application on the engineering problems.

Thanks for your time & suggestions.

November 12, 2003, 11:37

I would suggest the following: Handbook of grid generation / edited by Joe F. Thompson, Bharat K. Soni, Nigel P. Weatherill

The grid depends on the problem you are solving, the equations you are solving and so on. Some other book / paper may be more appropriate but I would start with this one.

-- Jarmo

November 12, 2003, 11:54

Here is a nice online book by Thompson:

http://www.erc.msstate.edu/publications/gridbook/

mach13 · September 7, 2009, 10:58

Hi
Common problem. Book by Thompson, might not help you when using a commercial software. No books for practical probs. I can recommend that you search for papers - ASME(GT & POWER,TURBO MACHINERY...etc),AIAA,Springerlink...etc for work on similar geometries and keep working by trial & error. All the best....

November 12, 2003, 01:59	need reference for structured mesh generation	#1
cfduser03 Guest Posts: n/a	Hi....I'm currently a GridGen user. I'm now working on the Structured mesh. Can anyone suggest some good reference books/ papers/ articles for generation of structured mesh? Have you come across any good literature review for the mesh generation? I'm an engineer and so I hope you can recommend those without too much mathematical details but will give me enough background in understanding the basics of grid generation. I do have a few books which give me lots of formulae but without any application on the engineering problems. Thanks for your time & suggestions.

November 12, 2003, 11:37	Re: need reference for structured mesh generation	#2
Jarmo Monttinen Guest Posts: n/a	I would suggest the following: Handbook of grid generation / edited by Joe F. Thompson, Bharat K. Soni, Nigel P. Weatherill The grid depends on the problem you are solving, the equations you are solving and so on. Some other book / paper may be more appropriate but I would start with this one. -- Jarmo

November 12, 2003, 11:54	Re: need reference for structured mesh generation	#3
Jonas Larsson Guest Posts: n/a	Here is a nice online book by Thompson: http://www.erc.msstate.edu/publications/gridbook/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simulation of a single bubble with a VOF-method	Suzzn	CFX	21	January 29, 2018 01:58
Gambit problems	Althea	FLUENT	22	January 4, 2017 04:19
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 07:42
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 04:32
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11

September 7, 2009, 10:58		#4
mach13 New Member mach Join Date: Sep 2009 Location: India Posts: 11 Rep Power: 17	Hi Common problem. Book by Thompson, might not help you when using a commercial software. No books for practical probs. I can recommend that you search for papers - ASME(GT & POWER,TURBO MACHINERY...etc),AIAA,Springerlink...etc for work on similar geometries and keep working by trial & error. All the best....