Home > Forums > General Forums > Main CFD Forum

mixed subsonic/supersonic flow at an inlet BC

Updated Threads

Reply

Search this Thread

March 11, 2003, 05:36	mixed subsonic/supersonic flow at an inlet BC	#1
sascha Guest Posts: n/a	hello all, what is the best way to define a physically correct BC for an inlet with mixed subsonic/supersonic flow ? Currently I use the total pressure at the inlet but acc. to the characteristics method it seems to be insufficient or unappropriate. ThanX Sascha

March 11, 2003, 05:46	Re: mixed subsonic/supersonic flow at an inlet BC	#2
Praveen Guest Posts: n/a	You must use some characteristic-based boundary conditions. See Chapter 19, Vol. 2 of the book by Hirsch.

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Velocity Inlet BC -- Flow Reversal	salihovic	FLUENT	0	May 8, 2011 06:45
Problems modeling subsonic engine air inlet with flow separation	TWaung	CFX	2	March 29, 2009 19:42
reversed flow at velocity inlet / mass flow inlet	ib	FLUENT	1	March 26, 2007 14:11
Reversed flow in pressure inlet	eric	FLUENT	3	January 26, 2004 21:04
Mass flow inlet B.C. at exit...	Jack Keays	FLUENT	2	October 6, 2000 09:39

All times are GMT -4. The time now is 16:26.