Ploting s/w for CFD

December 28, 2002, 07:34

Hello there, I am doing my M.tech. thesis on studying the three dimension flow in arabitray ducts(both developing and developed). I want to plot velocity and pressure distribution in ducts, can any one tell me bout good ploting s/w for this which has good visulation effects. It should not be much costlier. or some freeware for the same. Thanks in advance!

December 30, 2002, 08:53

Hy, Though i am not aware of cost parameters , my exp let me feel tecplot would be a better choice in postprocessing..morever, yes tecplot have some tril versions which u can try.I wish u can go to their home page. If u need any more in detail please let me know chakri..

January 1, 2003, 21:34

Hi friends,

There is a good CFD post processing software available free of cost in the net. It is called "Mayavi", developed by Mr.Prabhu ramachandran of Aerospace Dept. IIT Madras. It is very user friendly and easy to work and has lot of options like streamlines, ribbons, tubes...etc..

It is available on windows and also for linux m/c.

Download from : www.sourceforge.net

in the search type Mayavi

U can easily install it.

Good Luck

Krishnan

January 6, 2003, 05:32

Thanks a lot. I will try this. Regards

January 6, 2003, 05:36

Thanks a lot sir. orignal s/w is very costly i will try for demo thanks again. Regards

January 7, 2003, 05:03

Also you can go for www.opendx.org prasat

December 28, 2002, 07:34	Ploting s/w for CFD	#1
Manish Guest Posts: n/a	Hello there, I am doing my M.tech. thesis on studying the three dimension flow in arabitray ducts(both developing and developed). I want to plot velocity and pressure distribution in ducts, can any one tell me bout good ploting s/w for this which has good visulation effects. It should not be much costlier. or some freeware for the same. Thanks in advance!

December 30, 2002, 08:53	Re: Ploting s/w for CFD	#2
chakri Guest Posts: n/a	Hy, Though i am not aware of cost parameters , my exp let me feel tecplot would be a better choice in postprocessing..morever, yes tecplot have some tril versions which u can try.I wish u can go to their home page. If u need any more in detail please let me know chakri..

January 1, 2003, 21:34	Re: Ploting s/w for CFD	#3
krishnan Guest Posts: n/a	Hi friends, There is a good CFD post processing software available free of cost in the net. It is called "Mayavi", developed by Mr.Prabhu ramachandran of Aerospace Dept. IIT Madras. It is very user friendly and easy to work and has lot of options like streamlines, ribbons, tubes...etc.. It is available on windows and also for linux m/c. Download from : www.sourceforge.net in the search type Mayavi U can easily install it. Good Luck Krishnan

January 6, 2003, 05:32	Re: Ploting s/w for CFD	#4
Manish Guest Posts: n/a	Thanks a lot. I will try this. Regards

January 6, 2003, 05:36	Re: Ploting s/w for CFD	#5
Manish Guest Posts: n/a	Thanks a lot sir. orignal s/w is very costly i will try for demo thanks again. Regards

January 7, 2003, 05:03	Re: Ploting s/w for CFD	#6
prasat Guest Posts: n/a	Also you can go for www.opendx.org prasat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ploting liquid penetration	mooyii	OpenFOAM	2	September 9, 2011 19:24
best s/w for meshing	ajb	Main CFD Forum	2	June 12, 2009 11:01
CFD S/w	Chandra Kishor Ravi	Main CFD Forum	0	January 31, 2009 15:00
FEA s/w or FEA forums	Prashant	Main CFD Forum	7	December 7, 2003 10:42
looking for a post processing s/w	han	Main CFD Forum	0	May 9, 2001 23:44