IGES Geometry of Head

March 27, 2002, 07:05

Hi there,

Does anyone know where I can lay my hands on some geometry of a human head or face? (preferably for free)

Al

April 1, 2002, 19:16

I don't know if it helps, but this link from CFX shows an application example of forced ventilation flow around a human head. You might get more information about who ran the simulation (I assume using CFX) and get the IGES file from the guys who did it... God luck! http://www.software.aeat.com/cfx/industry/healthcare/

Fred.

April 12, 2002, 10:27

There are lots of free samples in faceted form. If you needed NURBS surface definition these won't help.

Free samples from scanning pages

http://www.hec.afrl.af.mil/cardlab/imaging/samples.html You will need to find a translator or write some code to get in your desired format.

http://www.cyberware.com/samples/index.html

3D animation and modeling sites have a lot of free model downloads also. (3DsMax)

March 27, 2002, 07:05	IGES Geometry of Head	#1
Alan Guest Posts: n/a	Hi there, Does anyone know where I can lay my hands on some geometry of a human head or face? (preferably for free) Al

April 1, 2002, 19:16	Re: IGES Geometry of Head	#2
FRED_PSU Guest Posts: n/a	I don't know if it helps, but this link from CFX shows an application example of forced ventilation flow around a human head. You might get more information about who ran the simulation (I assume using CFX) and get the IGES file from the guys who did it... God luck! http://www.software.aeat.com/cfx/industry/healthcare/ Fred.

April 12, 2002, 10:27	Re: IGES Geometry of Head	#3
Joe W. Guest Posts: n/a	There are lots of free samples in faceted form. If you needed NURBS surface definition these won't help. Free samples from scanning pages http://www.hec.afrl.af.mil/cardlab/imaging/samples.html You will need to find a translator or write some code to get in your desired format. http://www.cyberware.com/samples/index.html 3D animation and modeling sites have a lot of free model downloads also. (3DsMax)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Create geometry (iges or step file) from fluent mesh	muketa	ANSYS Meshing & Geometry	10	August 5, 2015 06:38
Export iges geometry file from .cas file	ongas	FLUENT	0	June 7, 2010 16:49
Simulation of Flow through Complex 3D Geometry	EmersonKB	CFX	5	July 2, 2009 09:17
vitual _ real	deneb	FLUENT	3	January 22, 2007 05:31
import geometry in IGES format	salvatore	Siemens	2	July 6, 2001 07:07