CFD THROUGH A NOZZLE OF AN INJECTOR

October 10, 2001, 15:58

DEARS I WOULD LIKE TO HAVE A VERY GOOD DISCUSSION ON THE ABOVE SUBJECT WAITING FOR YOUR REPLAIES THANKS

October 10, 2001, 17:19

OK.

Liquid, Gas, or a mixture (steam, gasoline in air)?

Geometry converging only, or converging-diverging?

Size (area ratio, inlet to throat), typical dimension?

Cross section? Square, rectangular, oval, or circle?

What do you hope to learn from the calculation?

Perhaps this will be something to start discussions.

October 11, 2001, 12:26

ok I am very happy to see ur message and i try to send u compelet. but what i want to dicuss is the characteristics of the flow which coming out of injector Xp the lenght of spray versa time what will happen to deltaP before combustion what will happen to particals after combustion all those which are bigger in size thanks and waiting for ur reply

October 13, 2001, 15:19

(1). I just don't think that there is anyone here who knows anything about it. (2). You need to find someone how is working at a research lab. And even if there is one, it is unlikely that he is going to share that information here in this flea market.

October 24, 2001, 11:11

DEAR MR.John C. Chien I DO AGREE WITH U AND I MYSELF IS STEEL RESERCHING THAT IN THE LAB.HERE. BUT I WANTED TO KNOWN WHERE, ANYBODY ELSE IS DOING WHAT ON THIS BEST REGARDS DR.GH.R.NAMAVAR

October 10, 2001, 15:58	CFD THROUGH A NOZZLE OF AN INJECTOR	#1
DR.GH.REZA NAMAVAR Guest Posts: n/a	DEARS I WOULD LIKE TO HAVE A VERY GOOD DISCUSSION ON THE ABOVE SUBJECT WAITING FOR YOUR REPLAIES THANKS

October 10, 2001, 17:19	Re: CFD THROUGH A NOZZLE OF AN INJECTOR	#2
Jim Park Guest Posts: n/a	OK. Liquid, Gas, or a mixture (steam, gasoline in air)? Geometry converging only, or converging-diverging? Size (area ratio, inlet to throat), typical dimension? Cross section? Square, rectangular, oval, or circle? What do you hope to learn from the calculation? Perhaps this will be something to start discussions.

October 11, 2001, 12:26	Re: CFD THROUGH A NOZZLE OF AN INJECTOR	#3
DR.GH.REZA NAMAVAR Guest Posts: n/a	ok I am very happy to see ur message and i try to send u compelet. but what i want to dicuss is the characteristics of the flow which coming out of injector Xp the lenght of spray versa time what will happen to deltaP before combustion what will happen to particals after combustion all those which are bigger in size thanks and waiting for ur reply

October 13, 2001, 15:19	Re: CFD THROUGH A NOZZLE OF AN INJECTOR	#4
John C. Chien Guest Posts: n/a	(1). I just don't think that there is anyone here who knows anything about it. (2). You need to find someone how is working at a research lab. And even if there is one, it is unlikely that he is going to share that information here in this flea market.

October 24, 2001, 11:11	Re: CFD THROUGH A NOZZLE OF AN INJECTOR	#5
Dr.GH.REZA NAMAVAR Guest Posts: n/a	DEAR MR.John C. Chien I DO AGREE WITH U AND I MYSELF IS STEEL RESERCHING THAT IN THE LAB.HERE. BUT I WANTED TO KNOWN WHERE, ANYBODY ELSE IS DOING WHAT ON THIS BEST REGARDS DR.GH.R.NAMAVAR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD for a micro nozzle	Korn	Main CFD Forum	0	August 15, 2009 11:29
Where do we go from here? CFD in 2001	John C. Chien	Main CFD Forum	36	January 24, 2001 22:10
ASME CFD Symposium, Atlanta, July 2001	Chris R. Kleijn	Main CFD Forum	0	September 13, 2000 05:48
ASME CFD Symposium, Atlanta, July 2001	Chris R. Kleijn	Main CFD Forum	0	August 21, 2000 05:49
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 13, 1999 00:27