CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

on curved channel flow numerical results

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 2, 2001, 01:30
Default on curved channel flow numerical results
  #1
yfyap
Guest
 
Posts: n/a
hi,

i am currently doing a simulation on curved channel flow (rectangular cross section). to verify my simulation results, i need to compare my simulation results with those of other investigators. but the problem is : where can i get numerical results of other investigators since in papers, only graphs are given ? any sources or suggestions are most appreciated. thanks.

yfyap
  Reply With Quote

Old   April 2, 2001, 03:21
Default Re: on curved channel flow numerical results
  #2
John C. Chien
Guest
 
Posts: n/a
(1). It's more than enough for me. (2). But you could try to get the related reports because the paper sometimes is the condensed version of the detailed report. You can find the report in the reference section of the paper. (3). You could also try to contact the authors, if they have not moved since the publication of the paper. These approaches are better, becuase there are always questions to ask.
  Reply With Quote

Old   April 2, 2001, 07:00
Default Re: on curved channel flow numerical results
  #3
andy
Guest
 
Posts: n/a
This a very common test case for turbulence models and has very likely been performed as part of a "benchmarking" exercise. If so, then the geometry, boundary conditions and results (if not a blind test) will have been distributed electronically. Try digging about the ERCOFTAC site for instance.

An alternative is simply to e-mail the authors and ask for the electronic results. Most are more than willing to see their results being used. However, be aware that some data will be owned by industrial sponsors and not the author's institution and so they may not be allowed to distribute it.
  Reply With Quote

Old   April 2, 2001, 13:11
Default Re: on curved channel flow numerical results
  #4
yfyap
Guest
 
Posts: n/a
dear John C and andy thanks. regards, yfyap
  Reply With Quote

Old   February 8, 2011, 05:44
Default hey
  #5
New Member
 
lyes
Join Date: Feb 2011
Posts: 24
Rep Power: 15
lyes43 is on a distinguished road
Quote:
Originally Posted by yfyap
;13855
hi,

i am currently doing a simulation on curved channel flow (rectangular cross section). to verify my simulation results, i need to compare my simulation results with those of other investigators. but the problem is : where can i get numerical results of other investigators since in papers, only graphs are given ? any sources or suggestions are most appreciated. thanks.

yfyap
hey i'm working on simulation of flow and heat transfer in a rectangular horizontal channel were I have heat sources mayu help me to simulate it i'm new in fluent
waiting ur answer thx lyes43@yahoo.com
lyes43 is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Open channel flow motaba Main CFD Forum 4 March 26, 2011 04:22
gas flow out of a C-D channel ljp FLUENT 0 March 7, 2011 15:32
mulltiple channel flow I.Dotsikas Main CFD Forum 2 September 23, 2010 21:49
Natural convection - Inlet boundary condition max91 CFX 1 July 29, 2008 21:28
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 22:31


All times are GMT -4. The time now is 12:34.