[appollosputnik]

Dear All.


I have developed a CFD package with user interface. The user interface is still to be done. But the generic model is built.


1. Geometry: A program for generating airfoils with maximum thickness and camber effects, then it should be a 5 digit nomenclature. e.g suj-30307 where maximum thickness is 30%c and maximum thickness position is at 30%c and camber is 7%. With this nomenclature I am able to draw an airfoil, and GUI will show it on screen. You can create multiple airfoils and select with hide/show options and many more like delete an item. etc.
2. After generating this airfoil we use a PDE mapping method for generating Elliptic and Hyperbolic grid over it. For this we use the derivatives and trace back the original points in the physical plane after meshing in the computational plane. All this programs and GUI is written in C++. And a mesh is shown on the screen over the wall.
3. Finally an upwind scheme, is used to solve the Euler equation for inviscid, compressible flows over this airfoil. I can show you a demo of what equations I am solving and how I am discretizing to interested folks.


Please if any one is interested to contribute to my work, and interested to see a demo please contact me.

My skype id is : engineer3dquartic and Email id is : yellowlemontree0821@gmail.com


I am looking for some investors on this project.