Home > Forums > General Forums > Main CFD Forum

Define interface of Air-water with fine mesh as free surface level

Updated Threads

Reply

Search this Thread

October 4, 2021, 09:14	Define interface of Air-water with fine mesh as free surface level	#1
Tushar Patel New Member Tushar Patel Join Date: Sep 2021 Location: Germany Posts: 3 Rep Power: 5	Hi everyone, I am currently simulating open channel flow with wave boundary conditions. Problem definition includes rigid plate, which has been considered as a rigid body, and it is floating over the water and should move along waves. I am getting many errors while applying such boundary conditions, the main issue with defining setup is about interface at the free surface. Can anyone suggest regarding mesh at the interface? Any kind of help or suggestions in this kind of simulation will be appreciated. Thanks!

Reply

Tags

mesh interface, multiphase boundary, open channel wave bc, vof model

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Creating very fine, high accuracy mesh with snappyHexMesh	JD_Welch	OpenFOAM Meshing & Mesh Conversion	10	July 5, 2023 12:50
Table bounds warnings at: END OF TIME STEP	CFXer	CFX	4	July 17, 2020 00:44
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water!	divergence	OpenFOAM Meshing & Mesh Conversion	0	January 23, 2019 05:17
[snappyHexMesh] Adding layers goes wrong with SnappyHexMesh	Elise	OpenFOAM Meshing & Mesh Conversion	1	April 22, 2013 03:32
[snappyHexMesh] Layers don't fully surround surface	EVBUCF	OpenFOAM Meshing & Mesh Conversion	14	August 20, 2012 05:31

All times are GMT -4. The time now is 15:39.