CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Simulation of Aerosol in fluid domain (AIR) in STAR CCM+

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 4, 2021, 11:07
Smile Simulation of Aerosol in fluid domain (AIR) in STAR CCM+
  #1
New Member
 
Ayan Tantary
Join Date: Apr 2021
Location: Srinagar India
Posts: 1
Rep Power: 0
ayan.tan is on a distinguished road
Hello everyone, first of all, I want to express my gratitude for being a part of the CFD forum, I am sure it will be a great help.

My question is about the Simulation of aerosol.
I am trying to inject aerosol (water droplets) inside a cylindrical pipe with one side as a velocity inlet and the other side as a pressure outlet. the aerosol is going in the counter direction of the air flow (from velocity inlet) so for example if the air flow is in x direction, aerosol is going in -x direction. I tried using the lagrangian multiphase model but I am rather confused and don't exactly know what to make out of the results. so my aim is to track the path of the aerosol particle, basically I want to create an air barrier, so the aerosol should not pass this barrier, that is why I am having an air flow in the opposite direction of that of the aerosol.

please walk me through with the procedure.

PS: I am a beginner with STAR CCM+

THANK YOU VERY MUCH
ayan.tan is offline   Reply With Quote

Reply

Tags
aerosol, lagrangian particle, lagrangian phase, star ccm+


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Marine Propeller Hydroacoustic Simulation in Star CCM BlackEagle STAR-CCM+ 1 December 8, 2017 22:33
Wrong flow in ratating domain problem Sanyo CFX 17 August 15, 2015 07:20
Overflow Error in Multiphase Modelling with Two Continuous Fluids ashtonJ CFX 6 August 11, 2014 15:32
injection problem Mark New FLUENT 0 August 4, 2013 02:30
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 05:04


All times are GMT -4. The time now is 22:29.