|
[Sponsors] |
Radial Fan (MRF/RBM). Problem with Rigid Body Motion -RBM |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Deutschland
Join Date: Sep 2020
Posts: 11
Rep Power: 6 ![]() |
Hello guys,
i simulate the fan behaviour of Moving Reference Frame MRF ("Frozen Rotor") and Rigid Body Motion RBM (Unsteady RANS).I have a problem with RBM.I got too much differential pressure.I thought the problem was with Geometry, but I made many changes to Geometry, but still nothing. There Are Physics for 3 Regions-Housing/Inlet/Rotor. Properties Region Housing-Physics Values-Motion Specification --- //Stationary/ReferenceFrame for Rotation// Region Inlet-Physics Values-Motion Specification ---- Stationary/ReferenceFrame for Rotation// Region Rotor-Physics Values-Motion Specification ---//Rotation/LAbFrame for Rotation// how i know the Region of Housing and of Inlet are Stationary and for that the Reference Frame must be Reference Frame for Rotation. But if i change only in Housing Region the Reference Frame for Rotation to LabFrame for Rotation , i get a perfect solution. is it correct? maybe you could help me ,i have a few days to find the reason . Thank you |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
6-DoF Rigid Body Motion | jumpa72 | OpenFOAM Running, Solving & CFD | 6 | March 1, 2024 02:38 |
SU2-7.0.1 on ubuntu 18.04 | hyunko | SU2 Installation | 7 | March 16, 2020 04:37 |
Multiple rigid body coupled motion problems | jinheng | OpenFOAM Running, Solving & CFD | 0 | October 3, 2019 19:29 |
Radial fan problem : Attn Razvan and all | Farhath | FLUENT | 0 | September 26, 2007 04:18 |
Dynamic meshing: UDF for rigid body Motion | Manoj Kumar | FLUENT | 0 | June 20, 2005 01:02 |