|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Mandeep Singh
Join Date: Jul 2018
Posts: 1
Rep Power: 0 ![]() |
Hello cfd community,
I have done a cfd analysis on free convection and forced convection of aluminium plate enclosed in a rectangular tube. In case of free convection,I have assigned 10 W power as heat source to plate surface and assigned outer wall as boundary condition to all six sides of tube(including opening and closing lids outer surfaces) with heat transfer coefficient value of 5 W/m2K. In case of forced convection,I have assigned fan of speed 7 m/s to a lid inner surface and environmental pressure to other side lid surface and outer wall of heat coefficient 5 W/m2K on four sides outer surface as boundary condition.heat source same as above. SO,I REQUEST ANYONE PLEASE HELP ME TO VERIFY THAT THIS BOUNDARY CONDITIONS WILL GIVE ME A CORRECT ANALYSIS RESULTS |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Implementation of boundary conditions for FVM | Tom | Main CFD Forum | 7 | August 26, 2014 05:58 |
About Cell Zone Conditions | Liufeng_ustb | FLUENT | 0 | May 17, 2013 23:28 |
Update boundary conditions calculated by an external program | CedricVH | OpenFOAM | 2 | January 15, 2010 11:55 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 04:05 |
Boundary conditions? | Tom | Main CFD Forum | 0 | November 5, 2002 01:54 |