 |
 |
 |
|
|
|
[Sponsors] | ||||
June 28, 2017, 13:23
|
Source Region not closed and manifold.
|
#1 |
|
New Member
Alexander Richey
Join Date: Jun 2017
Posts: 1
Rep Power: 0  |
I have tried multiple times to unite this part from its extracted volume or subtract the part from a solid block but it always comes up with this warning. I was able to use the extract volume on the part but not able to use unite or subtract on it. I have also used the surface wrapper feature to check for leaks as well, and there were no leaks. I don't know how to get it to work. Please help
|
|
|
|
|
 |
| Tags |
| no leaks, not closed and manifold, subtract, unite |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| source not closed and manifold error while performing boolean(subtract) operation | rockydongre | STAR-CCM+ | 3 | May 24, 2019 02:38 |
| error:Part Prop is not closed and Manifold, Boolean subtract | Vashishtha | STAR-CCM+ | 4 | August 2, 2018 08:58 |
| non manifold | senthur | STAR-CCM+ | 9 | December 1, 2014 06:37 |
| Transient simulation of intake manifold | Santoshnalanagula | FLUENT | 0 | January 1, 2014 08:32 |
| Automotive intake manifold CFD modeling with resonance. | DBFIU | Main CFD Forum | 0 | January 2, 2012 14:14 |
Linear Mode
