|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Join Date: Sep 2016
Posts: 3
Rep Power: 10 ![]() |
Hello friends,
I am working on software for solving Eulers equations in MATLAB, on structured grid, using Finite volume method with MacCormack Scheme and Jameson's artifical viscosity. I successfully ran program for GAMM channel test case. Now im trying to apply my software on different geometry, namely turbine cascade. For that i need to used periodicity boundary and i feel like I am implementing it wrong. So far structure of my program looks something like this: -set inlet/outlet boundary -set periodicity so that for grid enlarged by two ghost cells i have 1:ny+2 and i set W(:,1) = W(:,ny+1) and W(:,ny+2) = W(:,2) where W is vector of conservative values -calculate flux -calculate predictor -set periodicity again for predicted values same way -recalculate flux using values from predictor -calculate corrector -set ghost cells on inlet/outlet -set periodicity for enlarged matrice with 4 ghost cells (for Jameson) same way as above. -calculate Jameson -repeat I also apply wall boundary, but since it worked for me before i don't think there should be problem. At this point program does about 2000 iterations, residual is decresing, then it drop to complex values. My question is if my implementation of boundary is right. If yes, i would be glad for any advice on where can be mistake in my software, since i'm really stuck. Thanks for all the help and i'm sorry for my English. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Filippo Maria Denaro
Join Date: Jul 2010
Posts: 6,830
Rep Power: 73 ![]() ![]() ![]() |
I suggest to search for similar posts already answered
![]() |
|
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
Join Date: Sep 2016
Posts: 3
Rep Power: 10 ![]() |
Hello,
that's the point, i searched the forum and thought i understand how to implement the boundary. It even seems to be working, however i still get complex values. Thats why i posted here ![]() |
|
![]() |
![]() |
![]() |
Tags |
boundary condition, matlab, periodicity |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
My radial inflow turbine | Abo Anas | CFX | 27 | May 11, 2018 01:44 |
Multiphase flow - incorrect velocity on inlet | Mike_Tom | CFX | 6 | September 29, 2016 01:27 |
CFX13 Post Periodic interface | EtaEta | CFX | 7 | December 8, 2011 17:15 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |