CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

radiation flux rejected from surface

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 12, 2015, 00:55
Default radiation flux rejected from surface
  #1
New Member
 
sachin kumar
Join Date: Oct 2013
Location: himachal pradesh india
Posts: 5
Rep Power: 13
sachin kumar is on a distinguished road
I am simulating hypersonic flow(M = 7) over a blunt body. pressure farfield BCs is applied, and the walls of blunt body have heat flux BCs (q = 0). The top surface of the blunt body is subjected to radiation efflux (heat rejected in the form of radiation) the governing equation is [q(convection) - q(radiation) = 0] it will give me the temperature on the surface. I have used P1 model to consider the radiation and give internal emmsivity = 0.84, and compare the temperature with surface without radiation. the temperature is less in case of with radiation. but in postprocessing there is option called radiation incident, when i plot radiation incident there is a significant value. but in my problem there is a possibility of only radiation emission not incident.

so can any one tell me what is this incident radiation.
can i consider it as a amount of heat flux incident on the surface which is responsible for temperature generation.

if i am wrong with the procedure used to consider radiation, then can u please tell me the right way to consider radiation(rejection)
thanks in advance
sachin kumar is offline   Reply With Quote

Old   June 16, 2015, 03:43
Default
  #2
New Member
 
sachin kumar
Join Date: Oct 2013
Location: himachal pradesh india
Posts: 5
Rep Power: 13
sachin kumar is on a distinguished road
no body know?
sachin kumar is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Problem with Gmsh nishant_hull OpenFOAM Meshing & Mesh Conversion 23 August 5, 2015 03:09
Surface to surface radiation in steady state thermal module San123 ANSYS 0 March 4, 2015 11:10
Radiation on the surface hinca CFX 1 September 10, 2014 18:05
Question about heat transfer coefficient setting for CFX Anna Tian CFX 1 June 16, 2013 07:28
Radiation flux to the wall surface Jason Phoenics 1 May 26, 2004 02:13


All times are GMT -4. The time now is 13:21.