|
[Sponsors] |
February 23, 2015, 02:11 |
High Speed Pocket
|
#1 |
Member
Divyaprakash
Join Date: Jun 2014
Posts: 75
Rep Power: 12 |
I am getting a high speed pocket behind the shock region near the walls in my simulation of a supersonic flow over a forward step which I am unable to explain. My boundary conditions are Free-stream for the inlet and top, pressure outlet for the outlet and wall for everything else. Free stream is 520 m/s and the initial conditions are Mach 1.5 in each cell. The mesh and results are included in this post.
https://www.dropbox.com/s/4cyc5clocfzg3w8/Mesh.JPG?dl=0 https://www.dropbox.com/s/nd1qtrdtsb...ocket.JPG?dl=0 |
|
Tags |
boundary, mach, step, supersonic |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Temperature loss in compressible solvers in high speed flows | vkrastev | OpenFOAM Running, Solving & CFD | 1 | June 16, 2018 08:10 |
Segregated or Coupled? High Speed Flow Mixing. | Mazhar Azim | FLUENT | 2 | March 29, 2007 11:53 |
High speed multi-phase flow turbulence | Purkmeisster | Main CFD Forum | 0 | December 18, 2006 07:58 |
high speed flow with air dissociation | Victoria | Main CFD Forum | 0 | May 4, 2006 07:46 |
High speed bubbles dynamics | Rune W. Time | Main CFD Forum | 2 | June 28, 1999 11:22 |