|
[Sponsors] |
stack effect - natural ventilation - buoyancy |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 28, 2008, 05:21 |
stack effect - natural ventilation - buoyancy
|
#1 |
Guest
Posts: n/a
|
Hello,
We are a private non-profit technological center. We are looking for a CFD software to model the natural mouvement of the air in buildings, considering the buoyancy force (buoyancy occurs due to a difference in indoor-to-outdoor air density resulting from temperature and moisture differences) coupled with mechanical ventilation and the radiation effect (the surface of the building is at different temperatures, depending on its orientation). We've got ANSYS Mechanical, but not the CFX module (20-25 K&euro which, I think, could do this. We are looking for a cheaper solution, could you give me some ideas ? Thanks you a lot. Segis |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fluent natural ventilation pressure boundary condition | pierresandre | FLUENT | 24 | November 8, 2011 15:32 |
Natural ventilation arium cfx | kordou | Main CFD Forum | 0 | July 16, 2011 11:59 |
questions about natural Ventilation simulation driven by thermocompression | andylin | FLUENT | 0 | March 14, 2010 08:14 |
Phase locked average in run time | panara | OpenFOAM | 2 | February 20, 2008 15:37 |
Natural ventilation estimation | neihad | Phoenics | 3 | April 1, 2002 03:36 |